I'm having some trouble with a new CallManager Express setup. Everything is working (phone-to-phone calls, and outgoing calls by dialing 9 first) -- except incoming calls from the PSTN are not causing either of the two phones to ring.
If someone more knowledgeable could take a peek and let me know where I've gone wrong, that would be great!
Here are the relevant parts of my config. Thanks in advance! :)
! ! voice-port 0/3/0 ring number 10 !!! Won't ever get to 10 rings, so this is safe cptone CA connection plar 6135551212 !!! I also tried with "connection plar 10" to no avail caller-id enable ! ! dial-peer voice 1001 pots destination-pattern 9T port 0/3/0 ! ! ! telephony-service load 7960-7940 P00307020300 max-ephones 52 max-dn 192 ip source-address 10.0.0.1 port 2000 max-redirect 20 auto assign 1 to 2 timeouts interdigit 3 system message Cisco CallManager Express time-zone 12 time-format 24 create cnf-files version-stamp 7960 Sep 29 2005 08:02:25 max-conferences 16 gain -6 moh flash:en_bacd_music_on_hold.au web admin system name foobar password foobar dn-webedit time-webedit transfer-system full-consult ! ! ephone-dn 1 dual-line number 101 label Extension 101 name Ext 101 ! ! ephone-dn 2 dual-line number 102 label Extension 102 name Ext 102 ! ! ephone-dn 10 number 6135551212 name PSTN ! ! ephone 1 mac-address DEAD.BEEF.BABE type 7971 button 1:1 8:10 ! ! ! ephone 2 mac-address C0FF.EE00.BABE type 7960 button 1:2 6:10 ! !