1. Home
  2. CCTV, Alarms and other Physical Security
  3. SIA format and SIS Alarmcenter

SIA format and SIS Alarmcenter

I have the monitoring software SIS ALARMCENTER MULTIUSER version 4.3, connected with a Surgard Receiver, it is necessary to form something in order that SIS decodes signs in format SIA (DSC)?

Thanks

Ariel

Reply to
Ariel
Loading thread data ...

I have the monitoring sofware SIS ALARMCENTER MULTIUSER version 4.3, connected with a Surgard Receiver, it is necessary to form something in order that SIS decodes signs in format SIA (DSC)?

Thanks

Ariel

Reply to
Ariel

It will work just fine, the SIA codes are setup in the ZZ account.

Terry

Reply to
Securitech

Switch your monitoring software to A-traq

formatting link
You don't have to do anyhting as everything is defalut for SIA and all other protocols.You enjoy the benefits.I guarantee it!

Reply to
A-traq

oh yeah...just kinda switch your software

Reply to
Crash Gordon®

I used SIS software for almost eight years along with Surgard II receivers and found the software able to decipher almost any signal that was sent it's way from the receivers. As far as Ver 4.3 of the software; I would call tech support. It may have to be fine tuned.

Norm Mugford.

Reply to
Norm Mugford

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.