Quick question regarding the LYNXRPK-2 wireless security system.
I've just opened the box and barely skimmed the manaul, so maybe this is explained in the manual, but after installing the backup battery and AC power, I entered the installer's code and set the backlight timeout to 0. This should set the backlight to continuous, but it remains off. Is there a trick, or is it possibly defective?
Best, Christopher
That's for the keys not the display which has no backlight
Thanks, I did see that after posting. However, they keys are not backlit either.
Best, Christopher
Yes they are
I should have said, the backlight on my keys does not work. I only connected the two AC wires to the transformer. Do you suppose the other wires are needed for the backlight?
Best, Christopher
No and you are starting to scare me with questions like that
Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.