I lost the installer code on my Ademco Vista 10SE system.
How do I get a new installer code?
Then following sequential process DID NOT recover the installer code;
Power down the system (including battery) Power back up
- then #
I lost the installer code on my Ademco Vista 10SE system.
How do I get a new installer code?
Then following sequential process DID NOT recover the installer code;
Power down the system (including battery) Power back up
ask the installer?
Installer is out of business.
Miss> ask the installer?
after rereading your op you say * then #. wrong. * and # is correct.
Worst case, if you can't get the code you can replace the panel. The current version is Vista-10P. Some very early keypads don't work with the newest panels though. Also, to program the system you should use a 6160 keypad.
Hey Bass why trying to sell the poor man a new panel when you clearly read that he was pushing * THEN # when he need to push both AT THE SAME TIME..and that will give him access to the panel programming...
and don't start about not wanting to tell the guys how to do it cause other could use that info in a bad manner..you already posted the password and username of the web site that give access to all the ademco panel programming....
too bad we were there and watching in case you try to make another victim
"Robert L Bass" a écrit dans le message de news:
77ednZSbaty8Fz_YnZ2dnUVZ snipped-for-privacy@comcast.com...Petem,
You're absolutely right! There's always someone who says, "you can't do it"....and then in the same breath imply you need to buy a new one.
The words, "NO USER SERVICEABLE PARTS" on a device are only for people of little or no ability.
Petem wrote:
ws:
You mean these? honeywell support99
I never said you *can't* do it. I said *if* you can't they're not expensive to replace. Glad you were able to get it sorted out.
Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.