Ademco Vista 20 - fast short beeping

My system is doing a fast short beep at different times (usually seems to be middle of the night). It doesn't stop until I enter the code. I see it flashes BAT, but no zone. I think it might be the battery backup, but I changed that within the last 6 months. Is there anything else it can be?

Reply to
Mike C
Loading thread data ...

Check for loose battery connection. Charging circuit should read about

13.6 or so volts dc. Check transformer output. Should be about 17 to 18 volts ac. If everything checks out ok, its new batt time again. RW
Reply to
Roger W

Do you have any wireless devices in the system?

Do you have an arming/disarming keyfob?

Do you have a wireless panic button?

Reply to
Jim

I have 1 wireless motion sensor and 3 wireless door/window sensors. Those give a zone though when the battery is low and all have been changed recently.

I have a wireless disarm keyfob, but that is 3rd party (StreetSmart ) and not the same manufacturer as the alarm system.

Reply to
Mike C

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.