Latest threads in CCTV, Alarms and other Physical Securityshow only best voted threads

Subject Author Posted Replies
 
On a search
Honeywell has the 20IP with IP built in and you add antenna for GSM but it is not UL commercial fire I imagine they will be making them sooner or later as land lines fade away
9
9
 
Vista-32fb Message 'Notifying central station.
I've tried to setup new system 'vista 32fb'. After inputting zone setting and installer code and tel number, I got out of from the programming mode. When I tried to re-enter programming mode;resetting...
4
4
 
Subcontract Frustration
Thats why I gave up doing any further work for these national account ass hole company's . I have enough work do not need there fuck ups to deal with
8
8
 
monotronics
Anyone have any information on this company who is a monitoring service for home security systems? Quality of service, Reputation Customer service Thanks, R
3
3
 
Ford Transit Connect? Anyone using them?
inspections, etc... I was thinking of a 4WD/4x4 with good ground clearance to get through Canadian winters, back roads, steep and icy driveways, resi dential construction sites, etc. Of course, it...
17
17
 
Portable work surface
I would like to have some sort of portable work bench/table that I can stow in my truck. My truck is a pick up with an 8ft bed and a topper that does not extend above the cab. Inside the bed I've...
15
15
 
Can someone ID this coax?
I have coax cable that I'd like to use, but can't find anything with a web search (google and The _only_ marking is TVC-202970 There are no connectors crimped on, and I don't know where I got it. I'd...
2
2
 
CFP: 8th International Workshop on Critical Information Infrastructures Security (CRITIS 2013)
** Apologies for multiple copies ** C a l l     F o r     P a p e r s 8th International Workshop on Critical Information Infrastructures Security (CRITIS 2013) Amsterdam, The Netherlands...
1
1
 
Direct connect FBII panels to Compass or EZ-Mate
I seem to remember way back in the day, there was a way to directly connect a laptop running EZ-Mate to an FBII panel ie... XL-2P, XL-2T, XL-31, XL-4800 or XL-4.. Does anyone remember the way it...
6
6
 
NAPCO GEM-P9600 programming question
I was hoping someone could tell me how to adjust the time that an alarm rin gs for on the above referenced panel(It seems to continue to ring and I wou ld like to set perhaps a 30 minute limit). I...
6
6
 
Trying to match an Optima alarm panel to a Radio Shack Safe house bell box
The old alarm panel finally gave up the ghost, so I had to replace it with an Optima Compact Gen4 Panel. The panel wants the following: Board Bell Box Bell - ------ Trig (B) Bell + ------ Hold Off +...
2
2
 
My problem with back-up radios
Jim, I hope this answers you concerns: Telguard radios can be programmed to test the transmitter daily, weekly, or monthly... You may program them to send alarms via cellular first and use the...
2
2
 
Cheap DVR's Get Hacked
>>>>>>> First five rules of sexual shenanigans (which includes affairs and/or embarrassing behaviors/partners), never write anything down, never take any pictures, deny, deny, deny... Having done more...
22
22
 
Bogus Cat5
"The barn" makes a great lab. :-) Counterfeit "Cat 5" cables have been sold in the US and elsewhere around the world. There are serious problems with these cables regarding electrical performance and...
 
PowerMax pro download problem
I'm calling with remote programmer software via pstn direct modem a Visonic= PowerMax Pro panel. The panel answers the call but i get a steady tone in = the speaker of the modem (US Robotics 33.600...
1
1