Latest threads in CCTV, Alarms and other Physical Securityshow only best voted threads

Subject Author Posted Replies
 
Certain ID Honeywell (Ademco?)
They are fried after a storm... Not my install, but they can't get the company who installed it originally to even admit they used to do work here. I called them myself to verify I wasn't getting a...
6
6
 
Wireless Doorbell With Multiple Receivers?
Can anyone recommend a wireless doorbell that would work with multiple base receivers, at distances (through walls) of at least 400 feet? This is for a commercial installation and it needs to sound...
11
11
 
DSC 1832 Questions
Greetings All, I'm replacing an old DSC PC3000 panel with a DSC 1832 v4.6 panel. Obviousl y, I noticed some programming differences and am hoping to get some clarifi cation from the group. I...
5
5
 
Re: central station receiver to sale
I will take it send me a photo
 
SP4000 IP 150 problem
While trying to connect IP150 to serial port of a new SP4000 PCB (v5.14) i get nothing at all. IP150 no power at all. I measure pins at serial port tr ying to find 12-14 VDC but all of the pins at...
 
PAMA Carbon Monoxide Detectors Possible issue
If you have any of the older PAMA 2010 Co detectors check them out have 2 so far which have started to over heat and smoke cases up possible fire hazard
2
2
 
Where Do You Live?
Some light reading for a quiet Sunday Morning This is my neck of the woods... Traverse City, Michigan - Wikipedia Traverse City, Michigan - Wikipedia
1
1
 
I have a 5192SD detector, the red light is constantly on.
If the red light on detector is on constantly I was wondering if this is normal. Is the unit able to be reset? If unit needs to be replaced what would be the replacement model number? Thank-you Bob
2
2
 
Difference Between 23, 23 A or 23 AE Batteries?
I have a remote that has a 23 AE battery in it. I'm wondering if a 23 or 23 A battery would work in it since I'm having trouble finding a 23 AE locally? What is the difference between the three of...
 
Scantronic 500r+ Programming Mode
I want to add another remote keypad 524r. How do I get into Programming Mode on Control Panel to do this. HELP! Barry
 
Pinouts for Napco Gem rp1cae2 Keypad
Lost connector and need to re-wire keypad to system. Hate to guess! Thanks.
1
1
 
During building work disarmed the 500r+ alarm and radio detectors.
The panel does not power up when connected to mains. checked spur fuse and internal fuses - no luck. Any expert ideas !!
 
On Topic: PIR LED off or on afer installer walk test?
There are pro and cons to leaving the LED *on* a PIR after you walk test it and leave the installation. Honeywell wireless PIRs specifically state to turn off the LED after the walk test to conserve...
4
4
 
Old bank alarm
My name is Tom Stone and I own T.K. Woodshop in Hiawatha Kansas and I person brought me a cabnet to refinish and the tag thats on it says the American Bank Protection Co. Style 27 Manufacured by...
1
1
 
GPS locators
Slightly off topic perhaps, but I'm looking for recommendations on GPS trackers. Mainly for vehicles to be tracked in case of theft or for fleet management. Possibly also for keeping track of smaller...
2
2