Latest threads in CCTV, Alarms and other Physical Securityshow only best voted threads
Subject | Author | Posted | Replies | |
---|---|---|---|---|
|
I have a client who want to have is fire alarm on Kantech graphic
If possible what would i need. Corporate Edition latest version Will be hook up to a DSC 4020 intrusion panel. Only have one KT400 for now. I am thinking of input card In the KT400 and Will take the...
2
|
9 years ago
|
2 | |
|
I'm still chasing wires....
I've been doing more and more CNC machining and less and less communication contracting for the last couple years, so what did I spend all day doing today? Chasing down a bad connection and rewiring...
1
|
9 years ago
|
1 | |
|
USA, Kentucky, Fire Aalrm Inspectors CEU class
FYI: A class for Fire Alarm Inspectors to get their CEU for Ky Certification is being setup in Western Kentucky. All interested persons please reply for additional information.. RTS
—
|
9 years ago
|
— | |
|
ADI / Honeywell - Yep, Still a pattern of bad behavior....
ADI / Honeywell - Yep, Still a pattern of bad behavior... or atleast total carelessness. I've taken to paying my bill on-line because I don't get any bullshit about not receiving or lost checks that...
7
|
9 years ago
|
7 | |
|
Batteries
Well, regardless of the cost I have decided I am just going to use Yuasa batteries from now on. I've tried a dozen different brands and I hate doing what I consider un-necessary service calls. Screw...
4
|
9 years ago
|
4 | |
|
Paradox SP4000 on stay arm
While programming an SP4000 with instant zones (08) when i arm the system in stay mode the (08) instant zones goes into delay, they have entry delay time. Any idea what am i missing...? tnx in advance...
7
|
9 years ago
|
7 | |
|
DIY security without any consultant's advice
For wireless compatibility of alarm system, you'd better choose same manufacturer component such as same brand wireless keypad with control panel and wireless pir. Or use same brand wireless converter...
—
|
10 years ago
|
— | |
|
Alarm panel won't drive bell current
I have a DMP XR200 alarm panel with the bell output driving an MPI-11 siren driver. The panel bell output supplies 12VDC @1.5A max via an output relay. When the siren driver is connected, I can hear...
6
|
10 years ago
|
6 | |
|
KEY # 8 TIME LOSS-Esprit 626 Keypads
The eletricity was lost and the back-up battery was dead at home, when the power came back on , key # 8 illuminated. Using the user manual ,I've tryed in numerous times to reset the the problem, can't...
1
|
10 years ago
|
1 | |
|
Recommended batteries and amp-hour ratings for DMP systems
I have an XR200 DMP alarm panel and need to replace the backup batteries which currently are 2 Genesys (Yuasa) NP7-12 batteries (12v, 7Ah), each fed by a separate 16.5V 40VA transformer and charging...
1
|
10 years ago
|
1 | |
|
Maxsys PC4020 Problems
About a week ago Verizon announced they were changing our Fios phone service from the current analog system to digital service. At about 3AM the alarm went off startling my wife and I, but was most...
1
|
10 years ago
|
1 | |
|
Kidde "Badger" Universal Control Head
Looking for a little help with wire output.. Been tasked with the hookup of a Badger 60 Universal Control Head (Cook Ho= od Suppression system) to a local Fire Alarm Panel.. (alarm when the hood...
2
|
10 years ago
|
2 | |
|
napco quickloader port in use
I was trying to get quickloader to use my laptops internal agere modem but I always get port in use error. I can query the modem in windows settings b ut ql will not even attempt to use it without...
7
|
10 years ago
|
7 | |
|
Video: Corvette Museum security footage of collapse and aftermath
http://www.kentucky.com/2014/02/12/3084199/video-corvette-museum-security.html
—
|
10 years ago
|
— | |
|
LOL
Reading some of the OLD flame threads- laughing. Times have changed. much of the current posts are informative. lots of good information herein. Keep it up folks ~ JA
4
|
10 years ago
|
4 |