Latest threads in CCTV, Alarms and other Physical Securityshow only best voted threads
| Subject | Author | Posted | Replies | |
|---|---|---|---|---|
|
|
Navigator Reporter Software
We currently are using a Honeywell Fire Alarm System that has a 4100SM hooked up to an Ademco control panel. The 4100SM has a serial cable connected to a serial printer that prints the event log. We...
1
|
8 years ago
|
1 | |
|
|
pc 1550 need to reset after disconnecting sensor and then connecting
I disconnected a glass break sensor and then reconnected it, zone light stays on, I need to reset system.
1
|
8 years ago
|
1 | |
|
|
how do I do a factory reset on GE Caddx NX4 security system
I inherited a GE Caddx NX4 system not operational. Replaced the battery and installed new contacts on all doors. Everything was in order and looked fine. Then I got a code from the previous owner but...
2
|
8 years ago
|
2 | |
|
|
Bunker Hill - Yes Really
Had somebody call me this morning (twice actually) because they installed a Bunker Hill system and then couldn't get it to work. I told them to call Bunker Hill for support. I didn't want to stand...
2
|
9 years ago
|
2 | |
|
|
Callback failure how do I correct this.
Entrapass corp 6.00
1
|
9 years ago
|
1 | |
|
|
Edwards Fire Alarm
Hey you guys!!! I have a customer that just removed an old Edwards Fire Panel. Well not sure it should be called a "Panel" but it is a Edwards. Never saw one like this before. May have been installed...
3
|
9 years ago
|
3 | |
|
|
DSC 5108
Does anyone knows how many meters away from control panel can work 5108 zone expander? Thanks in advance!
3
|
9 years ago
|
3 | |
|
|
DSC PC1616 handshake error (2023 Update)
Any idea about DSC PC1616 v4.5? It cannot make handshake on residential dial format... I tried all the international settings for telephony, but still the issue remains.... thanks in advance!
6
|
9 years ago
|
6 | |
|
|
Removing the NAPCO MA1000e System
I've purchased a home with the NAPCO MA1000e security system installed. I've not subscribed to any monitoring service. Earlier today I came home and the alarm went of - first time this has happened...
5
|
9 years ago
|
5 | |
|
|
Firelite Firm ware upgrade suggested
Fire-Lite Panels Suggested Firmware Upgrade Document: FLSB15-1-1 Fire-Lite Alarms has identified a firmware issue that could potentially aff ect the operation of the Signaling Line Circuit (SLC) when...
—
|
9 years ago
|
— | |
|
|
XP 1 trans ponders will the silence switches on the left lower disable speaker
Fire system is disabled but the speakers still hum when we cause alarms. The system is old not programmed very well. We disable the speaker inputs also. The blue switch box on the lower left corner of...
1
|
9 years ago
|
1 | |
|
|
Digital Watchdog VMAXFLEX - (Why its discontinued)
I knew it was discontinued, but it such a decent unit for the price that I was still buying them for new installations. That might not have been such a great idea. I was told today they were not...
7
|
9 years ago
|
7 | |
|
|
Omnicron 9000. Can I pair in another 15mA infrared detector to my system?
I have 7 detectors at present, 2 of which are already paired, and I need to protect another room. My concern is whether the system has enough power to take another detector. Is Omnicron no longer in...
—
|
9 years ago
|
— | |
|
|
Osborne-Hoffman 2000E receiver problem
To All: Osborne-Hoffman 2000E receiver. Line one functions properly. Line two is the problem. No additional lines. When a signal is sent to line two, the receiver does not seize the line, hence the...
6
|
9 years ago
|
6 | |
|
|
Kantech Installer Password
Hi everyone. First post on here so hopefully I will get it right. I have worked with Kantech, and other access systems for quite a few years, but I have a problem I seem unable to solve. A previous...
—
|
9 years ago
|
— |