Latest threads in CCTV, Alarms and other Physical Securityshow only best voted threads
| Subject | Author | Posted | Replies | |
|---|---|---|---|---|
|
|
Testing Ignore if You can
Please ignore
4
|
5 years ago
|
4 | |
|
|
DSC general system tamper
The situation is the above. PC1616, PK5501, RF5132 and Envisalink4. I get s ervive fault general system tamper. The tamper at RF5132 is ok, also i disa ble wireless zone supervisions and also disable...
4
|
5 years ago
|
4 | |
|
|
IT WORKED !!!
I installed a fair number of Digital Watchdog DVRs the last few years I was in the business. One thing almost every one of them needed to work properly was a firmware upgrade. None of them ever seemed...
—
|
5 years ago
|
— | |
|
|
Fire Stop/Block
Hello all, I have a pending Fire Alarm install in a commercial building. I will need to use a Fire Block around wall penetrations. Anyone have a recommendation for what is to be used or not used in...
4
|
5 years ago
|
4 | |
|
|
NAPCO GEMINI 2006 GEM-RP1CAE2 kEYPAD
I WANT TO REPLACE THE BATTERY AND CANNOT TAKE THE COVER OFF. THERE ARE TWO SPACES ON THE BOTTOM TO USE A FLATHEAD IN TO FLIP UP BUT IT IS ONLY WORKING ON ONE SIDE AND I AM AFRAID I WILL BREAK THE...
5
|
5 years ago
|
5 | |
|
|
DSC Smart phone app with 2 partitions
Is there a service/app either cellular or IP that allows the virtual keypad on the app to switch partitions on DSC power series(not NEO)? Neither Starlink connect nor Alula currently offers that...
4
|
5 years ago
|
4 | |
|
|
I'm Back
Didja miss me?
7
|
5 years ago
|
7 | |
|
|
DSC Neo
Anyone have any experience with the DSC Neo panels? I've taken over some of the older DSC panels a number of years ago but this product appears to be in quite a different league. I'm just beginning to...
22
|
5 years ago
|
22 | |
|
|
Guard Tour System??
Hey yous guys!!! Anybody in here have any good knowledge or familiarity with a Guard Tour System?? I have a customer that is looking at installing a small system with only three(3) stations. Would...
10
|
5 years ago
|
10 | |
|
|
CFP: The 24th European Symposium on Research in Computer Security (ESORICS 2019)
========================= ========================= ========================= ===== *** Apologies for multiple copies *** C a l l F o r P a p e r s Twenty-fourth European Symposium on Research in...
—
|
5 years ago
|
— | |
|
|
ESORICS 2019 - Call for Workshop Proposals [24th European Symposium on Research in Computer Security, Luxembourg, 2019]
[apologies for cross-posting] ====================================================================== CALL for WORKSHOP PROPOSALS: ESORICS 2019 24th European Symposium on Research in Computer Security...
—
|
5 years ago
|
— | |
|
|
Fault in Motion Sensor
I have an Ademco Lynxr panel with several sensors throughout my house. I have recently been getting a "fault" error on one of my motion sensors, which I believe is the Honeywell 5890pi. I am aware of...
3
|
5 years ago
|
3 | |
|
|
Merry Christmas and Happy New Year
I'll be away for the holiday week so this is the last chance I'll have to wish you all happy holidays. Might check in while I'm away but ...... going to be pretty busy. See ya !
2
|
5 years ago
|
2 | |
|
|
Dell laptops are junk...
just back from the repair store it seems wife's Dell laptop had died again.. third processor gone bad in 2.5 years... wouldn't be so bad if it was being used. But it mostly just sits on the shelf as a...
15
|
5 years ago
|
15 | |
|
|
Adding Envisalink EVL4 - Auxillary Power Max'ed out?
I plan on purchasing an EVL4 shortly but have a question regarding Auxiliar y Power Maximums. I have a Vista 20P control panel with the below auxiliary devices which have a total current draw of 535ma...
5
|
5 years ago
|
5 |