<?xml version="1.0" encoding="ISO-8859-1"?>
<rss version="2.0" xmlns:content="http://purl.org/rss/1.0/modules/content/">
<channel>
<title>comp.dcom.sys.nortel</title>
<link>http://forums.cabling-design.com/comp.dcom.sys.nortel-newsgroup54-.htm</link>
<description>- Discuss Nortel hardware here</description>
<language>en-us</language>
<pubDate>Sat, 05 Jul 2008 06:08:13 -0400</pubDate>
<webMaster>info@cabling-design.com</webMaster>
<generator>http://www.cabling-design.com/</generator>
<docs>http://blogs.law.harvard.edu/tech/rss/</docs>
<item>
<title>Nortel 2002 VOIP phone reset</title>
<link>http://forums.cabling-design.com/Nortel-2002-VOIP-phone-reset-article3955-54.htm</link>
<description>Anyone know how to factory reset the settings of the Nortel 2002 voip phone   The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[Anyone know how to factory reset the settings of the Nortel 2002 voip phone   
<br/>The post does not have any replies yet. <a href="http://forums.cabling-design.com/Nortel-2002-VOIP-phone-reset-article3955-54.htm">Read more and discuss here</a>
]]></content:encoded>
<pubDate>Fri, 04 Jul 2008 20:44:45 -0400</pubDate>
</item>
<item>
<title>Re: Congress IS the problem</title>
<link>http://forums.cabling-design.com/Re-Congress-IS-the-problem-article3954-54.htm</link>
<description>Kun heinluoma otti 2008 vapun keskusteluaseekseen Suomen NATOjsenyyden ja lupaili, ettei kansamme ole sinne pakko menn, jossei sit kaipaa, on kyseess ...The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[Kun heinluoma otti 2008 vapun keskusteluaseekseen Suomen NATOjsenyyden ja lupaili, ettei kansamme ole sinne pakko menn, jossei sit kaipaa, on kyseess tietysti demokratian peruselementti. Vaan miksei Heinluoma samantien vaatinut asiasta kansan...
<br/>The post does not have any replies yet. <a href="http://forums.cabling-design.com/Re-Congress-IS-the-problem-article3954-54.htm">Read more and discuss here</a>
]]></content:encoded>
<pubDate>Sun, 29 Jun 2008 11:46:56 -0400</pubDate>
</item>
<item>
<title>Re: erreur carburant</title>
<link>http://forums.cabling-design.com/Re-erreur-carburant-article3953-54.htm</link>
<description>Maailmaa parhaillaan silpova ydinpstjen synnyttm nlnht alkaa saada sellaiset mittasuhteet, ettei sellaista olla nhty maailmansotien 40luvun. Suomessa ...The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[Maailmaa parhaillaan silpova ydinpstjen synnyttm nlnht alkaa saada sellaiset mittasuhteet, ettei sellaista olla nhty maailmansotien 40luvun. Suomessa ei tietysti poliittisesta harhaisuudesta ja kaunasta johtuvan ydinhaihattelujen yms. taki...
<br/>The post does not have any replies yet. <a href="http://forums.cabling-design.com/Re-erreur-carburant-article3953-54.htm">Read more and discuss here</a>
]]></content:encoded>
<pubDate>Sat, 28 Jun 2008 20:52:40 -0400</pubDate>
</item>
<item>
<title>NRU 10 missing MAP File</title>
<link>http://forums.cabling-design.com/NRU-10-missing-MAP-File-article3946-54.htm</link>
<description>I am running NRU 10 on a MICS 6.1 system and its giving me an error message:  Map file: AOF01ENG is required.  Does anyone have a copy of that MAP fil...... The post has 2 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[I am running NRU 10 on a MICS 6.1 system and its giving me an error message:  Map file: AOF01ENG is required.  Does anyone have a copy of that MAP file Thanks Bruce 
<br/>... The post has 2 replies so far. <a href="http://forums.cabling-design.com/NRU-10-missing-MAP-File-article3946-54.htm"> Read more and discuss here</a>
]]></content:encoded>
<pubDate>Fri, 27 Jun 2008 11:30:41 -0400</pubDate>
</item>
<item>
<title>VOIP Gateway for old Norstar system?</title>
<link>http://forums.cabling-design.com/VOIP-Gateway-for-old-Norstar-system-article3943-54.htm</link>
<description>I have an old Norstar 6x16 system w/ Compact DR5 software at work.  I have high speed Internet at work and home.  Are there any gateways available tha...... The post has 6 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[I have an old Norstar 6x16 system w/ Compact DR5 software at work.  I have high speed Internet at work and home.  Are there any gateways available that will allow me to add a 7310 or equiv. phone at home and connect it to the KSU at work over the Int...
<br/>... The post has 6 replies so far. <a href="http://forums.cabling-design.com/VOIP-Gateway-for-old-Norstar-system-article3943-54.htm"> Read more and discuss here</a>
]]></content:encoded>
<pubDate>Thu, 26 Jun 2008 21:12:06 -0400</pubDate>
</item>
<item>
<title>I can't Create new NPA under ac2 - ESN073</title>
<link>http://forums.cabling-design.com/I-cant-Create-new-NPA-under-ac2--ESN073-article3940-54.htm</link>
<description>Im trying to set up 10digit dialing on my PBX.  I cant tell you exactly what version Im working on.  Everything that Im reading says that I need to ad...... The post has 2 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Im trying to set up 10digit dialing on my PBX.  I cant tell you exactly what version Im working on.  Everything that Im reading says that I need to add a NPA.  well I try to do this on ac2 and I get the error ESN073.  I cant find that erro...
<br/>... The post has 2 replies so far. <a href="http://forums.cabling-design.com/I-cant-Create-new-NPA-under-ac2--ESN073-article3940-54.htm"> Read more and discuss here</a>
]]></content:encoded>
<pubDate>Wed, 25 Jun 2008 19:05:27 -0400</pubDate>
</item>
<item>
<title>BCM 400 swap IP set for T7316</title>
<link>http://forums.cabling-design.com/BCM-400-swap-IP-set-for-T7316-article3938-54.htm</link>
<description>I am trying to change a phone from an IP set to a T7316.  I have  deregistered the IP DN, how do I get the T7316 to be the IP sets old DN  Any help wo...The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[I am trying to change a phone from an IP set to a T7316.  I have  deregistered the IP DN, how do I get the T7316 to be the IP sets old DN  Any help would be greatly appreciated  Rob    
<br/>The post does not have any replies yet. <a href="http://forums.cabling-design.com/BCM-400-swap-IP-set-for-T7316-article3938-54.htm">Read more and discuss here</a>
]]></content:encoded>
<pubDate>Fri, 20 Jun 2008 09:23:11 -0400</pubDate>
</item>
<item>
<title>Factory Reset of OM3400 SP</title>
<link>http://forums.cabling-design.com/Factory-Reset-of-OM3400-SP-article3936-54.htm</link>
<description>Hello,  Were reprovisioning an old OM3400 which has an NTN421BA Enhanced Shelf Processor onboard.  Its been in storage for a few years but now we dont...The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[Hello,  Were reprovisioning an old OM3400 which has an NTN421BA Enhanced Shelf Processor onboard.  Its been in storage for a few years but now we dont have any staff who know the admin password.  Is there a procedure to factory reset the SP so ...
<br/>The post does not have any replies yet. <a href="http://forums.cabling-design.com/Factory-Reset-of-OM3400-SP-article3936-54.htm">Read more and discuss here</a>
]]></content:encoded>
<pubDate>Wed, 18 Jun 2008 15:44:57 -0400</pubDate>
</item>
<item>
<title>Nortel Secure Router 4134 Anyone using these?</title>
<link>http://forums.cabling-design.com/Nortel-Secure-Router-4134-Anyone-using-these-article3934-54.htm</link>
<description>The company I work for recently purchased two Nortel secure 4134 routers. One for our corporate office and one for our D.R. site. They are replacing o...The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[The company I work for recently purchased two Nortel secure 4134 routers. One for our corporate office and one for our D.R. site. They are replacing our Nortel BLN Routers. We have had nothing but a hard time getting these routers implemented. After ...
<br/>The post does not have any replies yet. <a href="http://forums.cabling-design.com/Nortel-Secure-Router-4134-Anyone-using-these-article3934-54.htm">Read more and discuss here</a>
]]></content:encoded>
<pubDate>Tue, 17 Jun 2008 11:42:20 -0400</pubDate>
</item>
<item>
<title>Nortel Meridian Modular ICS...Outside call doesn't...</title>
<link>http://forums.cabling-design.com/Nortel-Meridian-Modular-ICSOutside-call-doesnt-article3932-54.htm</link>
<description>We have an external line that is supposed to ring at an extension, but the phone doesnt ring. If you pick up line 1 while calling the call is there, b...... The post has 1 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[We have an external line that is supposed to ring at an extension, but the phone doesnt ring. If you pick up line 1 while calling the call is there, but it doesnt ring the handset.  How do I tell an external line to ring at an extension 
<br/>... The post has 1 replies so far. <a href="http://forums.cabling-design.com/Nortel-Meridian-Modular-ICSOutside-call-doesnt-article3932-54.htm"> Read more and discuss here</a>
]]></content:encoded>
<pubDate>Mon, 16 Jun 2008 15:36:34 -0400</pubDate>
</item>
<item>
<title>Page through sets on 11c?</title>
<link>http://forums.cabling-design.com/Page-through-sets-on-11c-article3928-54.htm</link>
<description>Can a direct page be made through 3904,3903 sets on a Option 11c    ... The post has 1 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Can a direct page be made through 3904,3903 sets on a Option 11c    
<br/>... The post has 1 replies so far. <a href="http://forums.cabling-design.com/Page-through-sets-on-11c-article3928-54.htm"> Read more and discuss here</a>
]]></content:encoded>
<pubDate>Sat, 14 Jun 2008 10:59:45 -0400</pubDate>
</item>
<item>
<title>T7316 set rings even when I am on the line</title>
<link>http://forums.cabling-design.com/T7316-set-rings-even-when-I-am-on-the-line-article3920-54.htm</link>
<description>I have poured over the manual and cant seem to get this fixed:  My T7316 set rings audibly even when I am on the line.  All other sets in our office d...... The post has 6 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[I have poured over the manual and cant seem to get this fixed:  My T7316 set rings audibly even when I am on the line.  All other sets in our office dump the caller straight to voicemail (this would be my preferred behaviour).  Any help available ...
<br/>... The post has 6 replies so far. <a href="http://forums.cabling-design.com/T7316-set-rings-even-when-I-am-on-the-line-article3920-54.htm"> Read more and discuss here</a>
]]></content:encoded>
<pubDate>Thu, 12 Jun 2008 10:25:12 -0400</pubDate>
</item>
<item>
<title>MerAssistant MAC replacement for OTM/TM</title>
<link>http://forums.cabling-design.com/MerAssistant-MAC-replacement-for-OTMTM-article3918-54.htm</link>
<description>There has been a lot of talk about OTM/TM and their features (or lack of).  There is a product called MerAssistant by RSI which appears to do all the ...... The post has 2 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[There has been a lot of talk about OTM/TM and their features (or lack of).  There is a product called MerAssistant by RSI which appears to do all the basic MAC functions at a fraction of the cost.  Has Anyone used it http://www.callaccountingsoftwar...
<br/>... The post has 2 replies so far. <a href="http://forums.cabling-design.com/MerAssistant-MAC-replacement-for-OTMTM-article3918-54.htm"> Read more and discuss here</a>
]]></content:encoded>
<pubDate>Wed, 11 Jun 2008 09:20:48 -0400</pubDate>
</item>
<item>
<title>nortel 425-48t</title>
<link>http://forums.cabling-design.com/nortel-42548t-article3917-54.htm</link>
<description>Hello,  recently i have started to have a strange problem.  i have 3 42548t standalone switchs connected to 1 4548GT Main switch, each standlone has a...The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[Hello,  recently i have started to have a strange problem.  i have 3 42548t standalone switchs connected to 1 4548GT Main switch, each standlone has a trunk of 2 gig to the main switch.   it seems the 2 of the switches, get reboot suddently every fe...
<br/>The post does not have any replies yet. <a href="http://forums.cabling-design.com/nortel-42548t-article3917-54.htm">Read more and discuss here</a>
]]></content:encoded>
<pubDate>Wed, 11 Jun 2008 07:18:00 -0400</pubDate>
</item>
<item>
<title>Determining Software Release on OM3500 Service Pro...</title>
<link>http://forums.cabling-design.com/Determining-Software-Release-on-OM3500-Service-Pro-article3916-54.htm</link>
<description>We have a service processor for the OM3500 with a locked / unknown admin  password.    We have not had luck in getting the card to reset its  configur...The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[We have a service processor for the OM3500 with a locked / unknown admin  password.    We have not had luck in getting the card to reset its  configuration when inserting it to a new shelf.    Is there a command we can  issue prior to logging in that...
<br/>The post does not have any replies yet. <a href="http://forums.cabling-design.com/Determining-Software-Release-on-OM3500-Service-Pro-article3916-54.htm">Read more and discuss here</a>
]]></content:encoded>
<pubDate>Wed, 11 Jun 2008 00:18:56 -0400</pubDate>
</item>
<item>
<title>Different Ringer Tone</title>
<link>http://forums.cabling-design.com/Different-Ringer-Tone-article3913-54.htm</link>
<description>We have an Administrative Assistant who has her Managers line as a SCR on her set.  She would like his line to ring differently than her line.  Can th...... The post has 3 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[We have an Administrative Assistant who has her Managers line as a SCR on her set.  She would like his line to ring differently than her line.  Can this be done and how  Her set is a 1140E.  We have a CS1000 (4.5)  
<br/>... The post has 3 replies so far. <a href="http://forums.cabling-design.com/Different-Ringer-Tone-article3913-54.htm"> Read more and discuss here</a>
]]></content:encoded>
<pubDate>Fri, 06 Jun 2008 11:54:47 -0400</pubDate>
</item>
<item>
<title>How I reset a password using Call Pilot?</title>
<link>http://forums.cabling-design.com/How-I-reset-a-password-using-Call-Pilot-article3905-54.htm</link>
<description>Im able to reset any  passwords via the web interface. I need to know if there is a way to reset a password from an administrator Voice mail box using...... The post has 4 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Im able to reset any  passwords via the web interface. I need to know if there is a way to reset a password from an administrator Voice mail box using a phone, all our phones are 3904s and we used call pilot manager.ver 3.0 all other voice mail s...
<br/>... The post has 4 replies so far. <a href="http://forums.cabling-design.com/How-I-reset-a-password-using-Call-Pilot-article3905-54.htm"> Read more and discuss here</a>
]]></content:encoded>
<pubDate>Thu, 29 May 2008 13:30:57 -0400</pubDate>
</item>
<item>
<title>Symposium Scripting</title>
<link>http://forums.cabling-design.com/Symposium-Scripting-article3904-54.htm</link>
<description>Can I run a script that triggers HDX within Symposium if a caller abandons from a skill set The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[Can I run a script that triggers HDX within Symposium if a caller abandons from a skill set 
<br/>The post does not have any replies yet. <a href="http://forums.cabling-design.com/Symposium-Scripting-article3904-54.htm">Read more and discuss here</a>
]]></content:encoded>
<pubDate>Thu, 29 May 2008 11:55:05 -0400</pubDate>
</item>
<item>
<title>Contact Center Manager</title>
<link>http://forums.cabling-design.com/Contact-Center-Manager-article3903-54.htm</link>
<description>I use the Contact Center Manager build 06.00.004.03. Upon loading the application I receive an error stating that I have an ActiveX control missing.  ...... The post has 1 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[I use the Contact Center Manager build 06.00.004.03. Upon loading the application I receive an error stating that I have an ActiveX control missing.  I have allowed ActiveX controls to run and yet the issue persists.  Is there a way to install this A...
<br/>... The post has 1 replies so far. <a href="http://forums.cabling-design.com/Contact-Center-Manager-article3903-54.htm"> Read more and discuss here</a>
]]></content:encoded>
<pubDate>Thu, 29 May 2008 05:36:42 -0400</pubDate>
</item>
<item>
<title>detect remote loopback on MSS Passport</title>
<link>http://forums.cabling-design.com/detect-remote-loopback-on-MSS-Passport-article3902-54.htm</link>
<description>Colleagues,  How can I figure out if an E1 link is operational or it is looped at the remote I see no difference in the output of the command quotd lp...... The post has 2 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Colleagues,  How can I figure out if an E1 link is operational or it is looped at the remote I see no difference in the output of the command quotd lp/1 e1/2quot when I check.  Thanks in advance for any input.    Victor Sudakov,  VAS4RIPE, VA...
<br/>... The post has 2 replies so far. <a href="http://forums.cabling-design.com/detect-remote-loopback-on-MSS-Passport-article3902-54.htm"> Read more and discuss here</a>
]]></content:encoded>
<pubDate>Wed, 28 May 2008 10:47:43 -0400</pubDate>
</item>
<item>
<title>DAS 120 MOH RAN</title>
<link>http://forums.cabling-design.com/DAS-120-MOH-RAN-article3899-54.htm</link>
<description>Anyone know of a replacement for the Das120 machines,apart from MIRAN,that is available in the UK The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[Anyone know of a replacement for the Das120 machines,apart from MIRAN,that is available in the UK 
<br/>The post does not have any replies yet. <a href="http://forums.cabling-design.com/DAS-120-MOH-RAN-article3899-54.htm">Read more and discuss here</a>
]]></content:encoded>
<pubDate>Tue, 13 May 2008 16:07:14 -0400</pubDate>
</item>
<item>
<title>Pilot - Nortel VoIP phones connecting to Cisco 650...</title>
<link>http://forums.cabling-design.com/Pilot--Nortel-VoIP-phones-connecting-to-Cisco-650-article3896-54.htm</link>
<description>We have been supporting Nortel VoIP trunk traffic (PBX to PBX w/VGMC) for several years now without any issues. We are now about to embark on our firs...... The post has 2 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[We have been supporting Nortel VoIP trunk traffic (PBX to PBX w/VGMC) for several years now without any issues. We are now about to embark on our first VoIP to the desktop pilot using Nortel 1140/1150 handsets along with a CS1000E switch.  We use all...
<br/>... The post has 2 replies so far. <a href="http://forums.cabling-design.com/Pilot--Nortel-VoIP-phones-connecting-to-Cisco-650-article3896-54.htm"> Read more and discuss here</a>
]]></content:encoded>
<pubDate>Tue, 13 May 2008 11:25:16 -0400</pubDate>
</item>
<item>
<title>cable com rs-232 to switch &quot;baystack 350-24T&quot;</title>
<link>http://forums.cabling-design.com/cable-com-rs232-to-switch-quotbaystack-35024Tquot-article3894-54.htm</link>
<description>Hi  I need scheme to make cable which is connecting pc with baystack 350 to set switch up by telnet.  Here is link to manual of my baystack:  http://w...... The post has 1 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Hi  I need scheme to make cable which is connecting pc with baystack 350 to set switch up by telnet.  Here is link to manual of my baystack:  http://www25.nortelnetworks.com/library/tpubs/pdf/switches/bstack/350F/04376C00.PDF  on page 245 is scheme h...
<br/>... The post has 1 replies so far. <a href="http://forums.cabling-design.com/cable-com-rs232-to-switch-quotbaystack-35024Tquot-article3894-54.htm"> Read more and discuss here</a>
]]></content:encoded>
<pubDate>Mon, 12 May 2008 17:45:45 -0400</pubDate>
</item>
<item>
<title>Using a Nortel Baystack 450-12f</title>
<link>http://forums.cabling-design.com/Using-a-Nortel-Baystack-45012f-article3891-54.htm</link>
<description>I picked up a Nortel Baystack 45012f very cheaply and am trying to put it to use. I have port 1 connected to a PC and port 6 connected to a Cisco 2900...... The post has 2 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[I picked up a Nortel Baystack 45012f very cheaply and am trying to put it to use. I have port 1 connected to a PC and port 6 connected to a Cisco 2900. The PC shows as connected as does the Cisco, and the 450 shows both ports as up but I cant ping...
<br/>... The post has 2 replies so far. <a href="http://forums.cabling-design.com/Using-a-Nortel-Baystack-45012f-article3891-54.htm"> Read more and discuss here</a>
]]></content:encoded>
<pubDate>Thu, 08 May 2008 23:55:59 -0400</pubDate>
</item>
<item>
<title>BM 50 Outgoing Caller ID</title>
<link>http://forums.cabling-design.com/BM-50-Outgoing-Caller-ID-article3888-54.htm</link>
<description>Hi.  I have a BCM 50 v3 with 6 analog trunks. I wanted my local telco (Embarq) to send only the pilot (main) number in the outgoing Caller ID string r...... The post has 4 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Hi.  I have a BCM 50 v3 with 6 analog trunks. I wanted my local telco (Embarq) to send only the pilot (main) number in the outgoing Caller ID string rather than the line that originated the call. Im trying to avoid calls being returned to anything ...
<br/>... The post has 4 replies so far. <a href="http://forums.cabling-design.com/BM-50-Outgoing-Caller-ID-article3888-54.htm"> Read more and discuss here</a>
]]></content:encoded>
<pubDate>Thu, 08 May 2008 11:45:24 -0400</pubDate>
</item>
<item>
<title>Nortel contivity 1100</title>
<link>http://forums.cabling-design.com/Nortel-contivity-1100-article3887-54.htm</link>
<description>Hi a person gave me a Nortel contivity 1100 that he like setup at his business, but he did not give me any documantion.  I can not find much info abou...... The post has 1 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Hi a person gave me a Nortel contivity 1100 that he like setup at his business, but he did not give me any documantion.  I can not find much info about it online.  Does any one know any thing about this  What i want to know is does the WAN interface...
<br/>... The post has 1 replies so far. <a href="http://forums.cabling-design.com/Nortel-contivity-1100-article3887-54.htm"> Read more and discuss here</a>
]]></content:encoded>
<pubDate>Wed, 07 May 2008 22:01:41 -0400</pubDate>
</item>
<item>
<title>WTB:  I NEED TO BUY LIST OF TELECOM, NETWORKING, S...</title>
<link>http://forums.cabling-design.com/WTB--I-NEED-TO-BUY-LIST-OF-TELECOM-NETWORKING-S-article3886-54.htm</link>
<description>WTB:  I NEED TO BUY LIST OF TELECOM, NETWORKING, SOFTWARE, CISCO, MICROSOFT, NORTEL, LUCENT, ALCATEL amp MORE   PLEASE LOOK BELOW AT ALL OF MY WANT TO...The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[WTB:  I NEED TO BUY LIST OF TELECOM, NETWORKING, SOFTWARE, CISCO, MICROSOFT, NORTEL, LUCENT, ALCATEL amp MORE   PLEASE LOOK BELOW AT ALL OF MY WANT TO BUYS..  PLEASE SCROLL ALL THE WAY DOWN TO SEE ALL.  WE BUY used, new and refurbed Sun, Cisco, Luc...
<br/>The post does not have any replies yet. <a href="http://forums.cabling-design.com/WTB--I-NEED-TO-BUY-LIST-OF-TELECOM-NETWORKING-S-article3886-54.htm">Read more and discuss here</a>
]]></content:encoded>
<pubDate>Tue, 06 May 2008 02:04:37 -0400</pubDate>
</item>
<item>
<title>BCM50 backup into BCM400</title>
<link>http://forums.cabling-design.com/BCM50-backup-into-BCM400-article3885-54.htm</link>
<description>Is it possible to take a backup of a BCM50 (SW 2.0) and restore it into a BCM400 (SW 4.0)  The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[Is it possible to take a backup of a BCM50 (SW 2.0) and restore it into a BCM400 (SW 4.0)  
<br/>The post does not have any replies yet. <a href="http://forums.cabling-design.com/BCM50-backup-into-BCM400-article3885-54.htm">Read more and discuss here</a>
]]></content:encoded>
<pubDate>Mon, 05 May 2008 17:22:44 -0400</pubDate>
</item>
<item>
<title>ERS/Passport 8600 firmware</title>
<link>http://forums.cabling-design.com/ERSPassport-8600-firmware-article3884-54.htm</link>
<description>Hi,  I am looking for latest firmware for 8600, maybe someone has it  somewhere in archives  regards, b2rat2 ... The post has 1 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Hi,  I am looking for latest firmware for 8600, maybe someone has it  somewhere in archives  regards, b2rat2 
<br/>... The post has 1 replies so far. <a href="http://forums.cabling-design.com/ERSPassport-8600-firmware-article3884-54.htm"> Read more and discuss here</a>
]]></content:encoded>
<pubDate>Mon, 05 May 2008 06:09:18 -0400</pubDate>
</item>
<item>
<title>Resetting Password For Admin on OPTera 3500</title>
<link>http://forums.cabling-design.com/Resetting-Password-For-Admin-on-OPTera-3500-article3883-54.htm</link>
<description>Is there a published procedure for resetting the configuration and admin  password to defaults on an OPTera 3500   Nortel doesnt appear to document  i...The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[Is there a published procedure for resetting the configuration and admin  password to defaults on an OPTera 3500   Nortel doesnt appear to document  it in the configuration guide.    Will    
<br/>The post does not have any replies yet. <a href="http://forums.cabling-design.com/Resetting-Password-For-Admin-on-OPTera-3500-article3883-54.htm">Read more and discuss here</a>
]]></content:encoded>
<pubDate>Sat, 03 May 2008 02:41:10 -0400</pubDate>
</item>
<item>
<title>Alteon AD3 WebOS Images</title>
<link>http://forums.cabling-design.com/Alteon-AD3-WebOS-Images-article3882-54.htm</link>
<description>This topic has surfaced several times in the past, sorry to bore you.  I inherited a new, unused Alteon AD3 with WebOS 8.0. Since this product has rea...The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[This topic has surfaced several times in the past, sorry to bore you.  I inherited a new, unused Alteon AD3 with WebOS 8.0. Since this product has reached EOL status at Nortel, there is no point of paying to Nortel for support contract to just get th...
<br/>The post does not have any replies yet. <a href="http://forums.cabling-design.com/Alteon-AD3-WebOS-Images-article3882-54.htm">Read more and discuss here</a>
]]></content:encoded>
<pubDate>Fri, 02 May 2008 15:28:59 -0400</pubDate>
</item>
<item>
<title>Nortel 8600 DHCP Relay (IP Helper) Question</title>
<link>http://forums.cabling-design.com/Nortel-8600-DHCP-Relay-(IP-Helper)-Question-article3876-54.htm</link>
<description>I was informed by my network staff that only one DHCP server is supported as a relay on the Nortel 8600. Is this correct Here is what I am trying to a...The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[I was informed by my network staff that only one DHCP server is supported as a relay on the Nortel 8600. Is this correct Here is what I am trying to accomplish:  We have two DHCP servers, split 50/50, and would like to have the switches relay to bot...
<br/>The post does not have any replies yet. <a href="http://forums.cabling-design.com/Nortel-8600-DHCP-Relay-(IP-Helper)-Question-article3876-54.htm">Read more and discuss here</a>
]]></content:encoded>
<pubDate>Mon, 28 Apr 2008 09:06:53 -0400</pubDate>
</item>
<item>
<title>Re: Nortel 8600 DHCP Relay (IP Helper) Question</title>
<link>http://forums.cabling-design.com/Re-Nortel-8600-DHCP-Relay-(IP-Helper)-Question-article3877-54.htm</link>
<description>SpecOp504@gmail.com ltSpecOp504@gmail.comgt wrote: igt I was informed by my network staff that only one DHCP server is/i igt supported as a relay on t...... The post has 4 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[SpecOp504@gmail.com ltSpecOp504@gmail.comgt wrote: igt I was informed by my network staff that only one DHCP server is/i igt supported as a relay on the Nortel 8600. Is this correct Here is what/i  No, thats not at all correct.  We...
<br/>... The post has 4 replies so far. <a href="http://forums.cabling-design.com/Re-Nortel-8600-DHCP-Relay-(IP-Helper)-Question-article3877-54.htm"> Read more and discuss here</a>
]]></content:encoded>
<pubDate>Mon, 28 Apr 2008 09:00:27 -0400</pubDate>
</item>
<item>
<title>Reporting for Contact Center: Custom Realtime Repo...</title>
<link>http://forums.cabling-design.com/Reporting-for-Contact-Center-Custom-Realtime-Repo-article3875-54.htm</link>
<description>Hello there,  We have a BCM50 system and use Reporting for Contact Center (v. 2.4.344.1.61). The system works brilliantly but I have found the format ...The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[Hello there,  We have a BCM50 system and use Reporting for Contact Center (v. 2.4.344.1.61). The system works brilliantly but I have found the format of the Reporting for Contact Center reports and the ipView software wallboard a little limited for m...
<br/>The post does not have any replies yet. <a href="http://forums.cabling-design.com/Reporting-for-Contact-Center-Custom-Realtime-Repo-article3875-54.htm">Read more and discuss here</a>
]]></content:encoded>
<pubDate>Wed, 23 Apr 2008 10:00:18 -0400</pubDate>
</item>
<item>
<title>Removing/Adding an extension to Nortel IP Phone 20...</title>
<link>http://forums.cabling-design.com/RemovingAdding-an-extension-to-Nortel-IP-Phone-20-article3871-54.htm</link>
<description>Hi all, Our office uses a number of Nortel IP phones 2002 and Nortel Norstar digital phones. The IP phones get their extensions via DHCP and once conf...... The post has 2 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Hi all, Our office uses a number of Nortel IP phones 2002 and Nortel Norstar digital phones. The IP phones get their extensions via DHCP and once configured, carry their extensions with them.The digital phones can either carry their extensions or rec...
<br/>... The post has 2 replies so far. <a href="http://forums.cabling-design.com/RemovingAdding-an-extension-to-Nortel-IP-Phone-20-article3871-54.htm"> Read more and discuss here</a>
]]></content:encoded>
<pubDate>Mon, 21 Apr 2008 15:59:34 -0400</pubDate>
</item>
<item>
<title>Optical Metro 5200 MIBS</title>
<link>http://forums.cabling-design.com/Optical-Metro-5200-MIBS-article3870-54.htm</link>
<description>Does anybody know where Optical Metro 5100/5200 MIBS can be found Ive digged through nortel.com and didnt find any...   Ilya Voronin The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[Does anybody know where Optical Metro 5100/5200 MIBS can be found Ive digged through nortel.com and didnt find any...   Ilya Voronin 
<br/>The post does not have any replies yet. <a href="http://forums.cabling-design.com/Optical-Metro-5200-MIBS-article3870-54.htm">Read more and discuss here</a>
]]></content:encoded>
<pubDate>Mon, 21 Apr 2008 14:45:51 -0400</pubDate>
</item>
<item>
<title>Software for Accelar / Passport 1100 and 1200 (2.1...</title>
<link>http://forums.cabling-design.com/Software-for-Accelar--Passport-1100-and-1200-(21-article3868-54.htm</link>
<description>Hi,  Im searching for the latest Software Release (2.1.6.0) for my Nortel Passport 1150 and an Accelar 1200 Im working with, also.  Has anyone an idea...The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[Hi,  Im searching for the latest Software Release (2.1.6.0) for my Nortel Passport 1150 and an Accelar 1200 Im working with, also.  Has anyone an idea how to get it Nortel doesnt support it anymore.  Greetings. 
<br/>The post does not have any replies yet. <a href="http://forums.cabling-design.com/Software-for-Accelar--Passport-1100-and-1200-(21-article3868-54.htm">Read more and discuss here</a>
]]></content:encoded>
<pubDate>Sat, 19 Apr 2008 08:14:53 -0400</pubDate>
</item>
<item>
<title>WTB:  I NEED TO BUY LIST OF TELECOM, NETWORKING, S...</title>
<link>http://forums.cabling-design.com/WTB--I-NEED-TO-BUY-LIST-OF-TELECOM-NETWORKING-S-article3867-54.htm</link>
<description>WTB:  I NEED TO BUY LIST OF TELECOM, NETWORKING, SOFTWARE, CISCO, MICROSOFT, NORTEL, LUCENT, ALCATEL amp MORE   PLEASE LOOK BELOW AT ALL OF MY WANT TO...The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[WTB:  I NEED TO BUY LIST OF TELECOM, NETWORKING, SOFTWARE, CISCO, MICROSOFT, NORTEL, LUCENT, ALCATEL amp MORE   PLEASE LOOK BELOW AT ALL OF MY WANT TO BUYS..  PLEASE SCROLL ALL THE WAY DOWN TO SEE ALL.  WE BUY used, new and refurbed Sun, Cisco, Luc...
<br/>The post does not have any replies yet. <a href="http://forums.cabling-design.com/WTB--I-NEED-TO-BUY-LIST-OF-TELECOM-NETWORKING-S-article3867-54.htm">Read more and discuss here</a>
]]></content:encoded>
<pubDate>Fri, 18 Apr 2008 20:35:48 -0400</pubDate>
</item>
<item>
<title>Option 11C outbound caller ID issue</title>
<link>http://forums.cabling-design.com/Option-11C-outbound-caller-ID-issue-article3866-54.htm</link>
<description>I have an issue where I had ported over to a new carrier (X/O) who does not allow calls with caller ID with numbers outside the DID or BTN range. The ...... The post has 1 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[I have an issue where I had ported over to a new carrier (X/O) who does not allow calls with caller ID with numbers outside the DID or BTN range. The issue is that when I dial local 7 digit numbers, the CLID is only 7 digits and X/O will not process ...
<br/>... The post has 1 replies so far. <a href="http://forums.cabling-design.com/Option-11C-outbound-caller-ID-issue-article3866-54.htm"> Read more and discuss here</a>
]]></content:encoded>
<pubDate>Fri, 18 Apr 2008 03:32:57 -0400</pubDate>
</item>
<item>
<title>Question on lacp command output</title>
<link>http://forums.cabling-design.com/Question-on-lacp-command-output-article3865-54.htm</link>
<description> Hello, Could someone please tell me what the quotattached aggrquot of 4 and quottrunkquot value 16 mean in this output. I cant find any documentation...The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[ Hello, Could someone please tell me what the quotattached aggrquot of 4 and quottrunkquot value 16 mean in this output. I cant find any documentation which explains these fields in detail. Thanks    igtgt Configuration /i/l2/lacp/dump...
<br/>The post does not have any replies yet. <a href="http://forums.cabling-design.com/Question-on-lacp-command-output-article3865-54.htm">Read more and discuss here</a>
]]></content:encoded>
<pubDate>Fri, 18 Apr 2008 03:11:18 -0400</pubDate>
</item>
<item>
<title>Loading 'Call for Help' modems (SEB, ASAP, ENS, et...</title>
<link>http://forums.cabling-design.com/Loading-Call-for-Help-modems-(SEB-ASAP-ENS-et-article3861-54.htm</link>
<description>I am trying to compile a list of system messages that will set off quotCall for Helpquot modems (SEB, ASAP, ENS, etc) , commonly installed on Nortel s...The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[I am trying to compile a list of system messages that will set off quotCall for Helpquot modems (SEB, ASAP, ENS, etc) , commonly installed on Nortel system TTY ports.  For example, if the TTY outputs: SYS0000 or INI000, you would want the modem t...
<br/>The post does not have any replies yet. <a href="http://forums.cabling-design.com/Loading-Call-for-Help-modems-(SEB-ASAP-ENS-et-article3861-54.htm">Read more and discuss here</a>
]]></content:encoded>
<pubDate>Fri, 11 Apr 2008 14:21:16 -0400</pubDate>
</item>
<item>
<title>Need Nortel Engineers</title>
<link>http://forums.cabling-design.com/Need-Nortel-Engineers-article3859-54.htm</link>
<description>Looking for about nine Nortel PBX engineers for work in the NJ area. Pay comparable to experience.  If interested send resumes to ryukyu02@comcast.net...The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[Looking for about nine Nortel PBX engineers for work in the NJ area. Pay comparable to experience.  If interested send resumes to ryukyu02@comcast.net. 
<br/>The post does not have any replies yet. <a href="http://forums.cabling-design.com/Need-Nortel-Engineers-article3859-54.htm">Read more and discuss here</a>
]]></content:encoded>
<pubDate>Thu, 10 Apr 2008 23:15:17 -0400</pubDate>
</item>
<item>
<title>WTB:  I NEED TO BUY LIST OF TELECOM, NETWORKING, S...</title>
<link>http://forums.cabling-design.com/WTB--I-NEED-TO-BUY-LIST-OF-TELECOM-NETWORKING-S-article3858-54.htm</link>
<description>WTB:  I NEED TO BUY LIST OF TELECOM, NETWORKING, SOFTWARE, CISCO, MICROSOFT, NORTEL, LUCENT, ALCATEL amp MORE   PLEASE LOOK BELOW AT ALL OF MY WANT TO...The post does not have any replies yet. Read more and discuss here
</description>
<content:encoded><![CDATA[WTB:  I NEED TO BUY LIST OF TELECOM, NETWORKING, SOFTWARE, CISCO, MICROSOFT, NORTEL, LUCENT, ALCATEL amp MORE   PLEASE LOOK BELOW AT ALL OF MY WANT TO BUYS..  PLEASE SCROLL ALL THE WAY DOWN TO SEE ALL.  WE BUY used, new and refurbed Sun, Cisco, Luc...
<br/>The post does not have any replies yet. <a href="http://forums.cabling-design.com/WTB--I-NEED-TO-BUY-LIST-OF-TELECOM-NETWORKING-S-article3858-54.htm">Read more and discuss here</a>
]]></content:encoded>
<pubDate>Thu, 10 Apr 2008 20:05:46 -0400</pubDate>
</item>
<item>
<title>flash card for ARN (Advanced Remote Node) router</title>
<link>http://forums.cabling-design.com/flash-card-for-ARN-(Advanced-Remote-Node)-router-article3852-54.htm</link>
<description>Hi all:  I have some unformat flash card for ARN (Advanced Remote Node) router. WinXP cant recognize them (question mark you know). I cant format them...... The post has 1 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Hi all:  I have some unformat flash card for ARN (Advanced Remote Node) router. WinXP cant recognize them (question mark you know). I cant format them by using the drivers provided by XP. I tried to search and download some drivers from Internet, non...
<br/>... The post has 1 replies so far. <a href="http://forums.cabling-design.com/flash-card-for-ARN-(Advanced-Remote-Node)-router-article3852-54.htm"> Read more and discuss here</a>
]]></content:encoded>
<pubDate>Wed, 09 Apr 2008 20:20:51 -0400</pubDate>
</item>
<item>
<title>Remote Analog ext on Option 11c</title>
<link>http://forums.cabling-design.com/Remote-Analog-ext-on-Option-11c-article3851-54.htm</link>
<description>I need to extend an Analog Ext from Option 11c via ethernet/VOIP to a remote  location.  Otion 11c does not have any VOIP capabilities.  Any  recommen...... The post has 3 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[I need to extend an Analog Ext from Option 11c via ethernet/VOIP to a remote  location.  Otion 11c does not have any VOIP capabilities.  Any  recommendations    Ive been looking at the Mediatrix 1204/2102.  Thanks,  Chuck    
<br/>... The post has 3 replies so far. <a href="http://forums.cabling-design.com/Remote-Analog-ext-on-Option-11c-article3851-54.htm"> Read more and discuss here</a>
]]></content:encoded>
<pubDate>Wed, 09 Apr 2008 16:45:56 -0400</pubDate>
</item>
<item>
<title>KIM 24 on Modular ICS does not show &quot;on hold&quot;</title>
<link>http://forums.cabling-design.com/KIM-24-on-Modular-ICS-does-not-show-quoton-holdquot-article3847-54.htm</link>
<description>Not sure if there is a way to do this, but while the Key Indicator Module shows when an extension is on the line, it goes clear when put on regular or...... The post has 1 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Not sure if there is a way to do this, but while the Key Indicator Module shows when an extension is on the line, it goes clear when put on regular or exclusive hold.  This has been designated the (only) Central Answering Position.  Any way to show w...
<br/>... The post has 1 replies so far. <a href="http://forums.cabling-design.com/KIM-24-on-Modular-ICS-does-not-show-quoton-holdquot-article3847-54.htm"> Read more and discuss here</a>
]]></content:encoded>
<pubDate>Fri, 04 Apr 2008 15:31:27 -0400</pubDate>
</item>
<item>
<title>Meridian Norstar 616 CCU quiet line and memory up....</title>
<link>http://forums.cabling-design.com/Meridian-Norstar-616-CCU-quiet-line-and-memory-up-article3845-54.htm</link>
<description>Hi,  We have running in our office a Meridian Norstar 616 phone system. The system has worked perfectly for years.  Now it seems if we experience a po...... The post has 2 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Hi,  We have running in our office a Meridian Norstar 616 phone system. The system has worked perfectly for years.  Now it seems if we experience a power cut we lose all the programming. Not only that but two of the incoming lines have become quiet. ...
<br/>... The post has 2 replies so far. <a href="http://forums.cabling-design.com/Meridian-Norstar-616-CCU-quiet-line-and-memory-up-article3845-54.htm"> Read more and discuss here</a>
]]></content:encoded>
<pubDate>Thu, 03 Apr 2008 07:15:09 -0400</pubDate>
</item>
<item>
<title>StarTalk flash and Modular ICS upgrade</title>
<link>http://forums.cabling-design.com/StarTalk-flash-and-Modular-ICS-upgrade-article3841-54.htm</link>
<description>We upgraded our Modular ICS to 7.1 last weekend.  Since then, the second channel on the mailbox ports switches by itself from quotSTK1quot to unassign...... The post has 7 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[We upgraded our Modular ICS to 7.1 last weekend.  Since then, the second channel on the mailbox ports switches by itself from quotSTK1quot to unassigned and back.  When it is unassigned, we cant send calls to mail boxes.  Now for the really wei...
<br/>... The post has 7 replies so far. <a href="http://forums.cabling-design.com/StarTalk-flash-and-Modular-ICS-upgrade-article3841-54.htm"> Read more and discuss here</a>
]]></content:encoded>
<pubDate>Wed, 02 Apr 2008 15:46:49 -0400</pubDate>
</item>
<item>
<title>Help required with Nortel Passport 4455</title>
<link>http://forums.cabling-design.com/Help-required-with-Nortel-Passport-4455-article3840-54.htm</link>
<description>I have a customer who has a dilema and therefore... so do I.  London Router is a Passport 4455 with base controller and additional DPNSS Voice Module ...... The post has 1 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[I have a customer who has a dilema and therefore... so do I.  London Router is a Passport 4455 with base controller and additional DPNSS Voice Module and 2 x Card with DPNSS channels totalling 30 in all over all cards.   The Norwich Router is the sam...
<br/>... The post has 1 replies so far. <a href="http://forums.cabling-design.com/Help-required-with-Nortel-Passport-4455-article3840-54.htm"> Read more and discuss here</a>
]]></content:encoded>
<pubDate>Wed, 02 Apr 2008 10:58:34 -0400</pubDate>
</item>
<item>
<title>NTLX17AA</title>
<link>http://forums.cabling-design.com/NTLX17AA-article3839-54.htm</link>
<description>Hi All,  I am looking to purchase Qty 5 NTLX17AA cards, can anyone help  Regards  Ken ... The post has 1 replies so far. Read more and discuss here
</description>
<content:encoded><![CDATA[Hi All,  I am looking to purchase Qty 5 NTLX17AA cards, can anyone help  Regards  Ken 
<br/>... The post has 1 replies so far. <a href="http://forums.cabling-design.com/NTLX17AA-article3839-54.htm"> Read more and discuss here</a>
]]></content:encoded>
<pubDate>Tue, 01 Apr 2008 07:34:28 -0400</pubDate>
</item>
</channel>
</rss>