http://forums.cabling-design.com/comp.dcom.sys.cisco-newsgroup53-.htm - discuss CISCO hardware here en-us Sat, 05 Jul 2008 06:08:12 -0400 info@cabling-design.com http://www.cabling-design.com/ http://blogs.law.harvard.edu/tech/rss/ http://forums.cabling-design.com/Linksys-SFE2000P--not-really-a-Cisco-article41051-53.htm This little beastie has a very Ciscoesqe CLI, and after googling a few of the commands, I noticed that it is in fact identical to a Dell Powerconnec...... The post has 2 replies so far. Read more and discuss here ... The post has 2 replies so far. Read more and discuss here ]]> Fri, 04 Jul 2008 17:44:37 -0400 http://forums.cabling-design.com/Virtual-Switching-System-1440-article41050-53.htm Do I understand correctly, that the VSS 1440 is a port of the well known stacking mechanisms known from other switches So if the supervisor board VS....... The post has 1 replies so far. Read more and discuss here ... The post has 1 replies so far. Read more and discuss here ]]> Fri, 04 Jul 2008 17:26:48 -0400 http://forums.cabling-design.com/QOS-VOIP--Hosted-IP-PBX-Provider-article41045-53.htm Hi, Cisco 1720 router with 1 internet T1 to a IP PBX hosted provider. I am having constant dropped calls, choppy, echoes, backup noises and clipped c...... The post has 3 replies so far. Read more and discuss here ... The post has 3 replies so far. Read more and discuss here ]]> Fri, 04 Jul 2008 11:04:24 -0400 http://forums.cabling-design.com/Packet-Capturing-article41041-53.htm Hi all I want to do some sniffing on my network due to users reporting speed issues on the LAN, I have PRTG installed but I am not seeing anything unu...... The post has 2 replies so far. Read more and discuss here ... The post has 2 replies so far. Read more and discuss here ]]> Fri, 04 Jul 2008 02:43:27 -0400 http://forums.cabling-design.com/Some-wireless-clients-cannot-detect-my-unbroadcast-article41039-53.htm hello, Some of the wireless clients (Windows XP Pro with builtin Intel ProSet G Wireless client) cannot detect my unbroadcast Aironet AP. It finally ...... The post has 2 replies so far. Read more and discuss here ... The post has 2 replies so far. Read more and discuss here ]]> Thu, 03 Jul 2008 23:21:34 -0400 http://forums.cabling-design.com/Disabling-mls-article41038-53.htm Wondering what would be a reason for disabling mls for ip and ipv6 on a c6509. Thanks ... The post has 1 replies so far. Read more and discuss here ... The post has 1 replies so far. Read more and discuss here ]]> Thu, 03 Jul 2008 16:12:39 -0400 http://forums.cabling-design.com/Job-Posting-Cisco-Support-Consultant-article41037-53.htm Sapphire Technologies, Canadas largest IT staffing company, is looking for a contract Cisco Support Consultant for their client in Toronto, Canada. Th...The post does not have any replies yet. Read more and discuss here The post does not have any replies yet. Read more and discuss here ]]> Thu, 03 Jul 2008 10:55:33 -0400 http://forums.cabling-design.com/IP-changes-article41035-53.htm If I need to modify the subnet mask on one router and mask and IP on another can I use the ip address command or do I need to delete the entry with n...... The post has 1 replies so far. Read more and discuss here ... The post has 1 replies so far. Read more and discuss here ]]> Thu, 03 Jul 2008 07:46:35 -0400 http://forums.cabling-design.com/A-question-about-default-vlan-article41032-53.htm Suppose I have a new cisco switch and all ports are belong to vlan 1. I use quotinterface0/1 switchport access vlan90quot Does this interface0/1 still...... The post has 3 replies so far. Read more and discuss here ... The post has 3 replies so far. Read more and discuss here ]]> Wed, 02 Jul 2008 19:43:07 -0400 http://forums.cabling-design.com/cisco-networking-article41029-53.htm Hi, We have some used cisco cards in available.All these cisco parts are refurbished, original, tested, and with 90day warranty. If you interested ple...The post does not have any replies yet. Read more and discuss here The post does not have any replies yet. Read more and discuss here ]]> Wed, 02 Jul 2008 04:20:50 -0400 http://forums.cabling-design.com/Cisco-2600--DSL--Cable-gt-Failover-and-port-forw-article41028-53.htm To whom it shall concern: I am interested in reconfiguring a Cisco 2600 such that it can perform failover between a DSL and Cable connection (both ha...The post does not have any replies yet. Read more and discuss here The post does not have any replies yet. Read more and discuss here ]]> Wed, 02 Jul 2008 00:47:40 -0400 http://forums.cabling-design.com/Newbie-Help-W-Password-article41025-53.htm I set my vty password to quotciscoquot. However, when I telnet into the IP address on my interface it wont accept that as a password. I tried every pa...... The post has 2 replies so far. Read more and discuss here ... The post has 2 replies so far. Read more and discuss here ]]> Tue, 01 Jul 2008 18:20:07 -0400 http://forums.cabling-design.com/L2TPv3--oneway-tunnel-article41023-53.htm Ive got an L2TPv3 tunnel set up between our central location and one of our remote sites. Everything looks OK, but data is only flowing one way (from ...The post does not have any replies yet. Read more and discuss here The post does not have any replies yet. Read more and discuss here ]]> Tue, 01 Jul 2008 16:42:38 -0400 http://forums.cabling-design.com/How-is-quotpriquot-calculated-automatically-by-GLBP--article41007-53.htm Hello. By using quotdebug glbp eventsquot can see something like the following output. GLBP: Fa0/0 123.1 Listen: k/Hello rcvd from lower pri Acti v...The post does not have any replies yet. Read more and discuss here The post does not have any replies yet. Read more and discuss here ]]> Tue, 01 Jul 2008 01:23:13 -0400 http://forums.cabling-design.com/Is-there-a-market-for-an-open-source-router-article40999-53.htm quotWhile Cisco accidentally created an open source router a few years ago, getting caught with Linux in its Linksys, the company never exploited thi...... The post has 22 replies so far. Read more and discuss here ... The post has 22 replies so far. Read more and discuss here ]]> Mon, 30 Jun 2008 21:07:13 -0400 http://forums.cabling-design.com/Question-about-NAT-(maybe-need-to-use-policy-NAT)-article40996-53.htm Hi, This is what I was thinking of doing: Router: interface Ethernet0 ip address xx.xx.xx.209 255.255.255.240 interface Dialer0 ip address negotiat...... The post has 2 replies so far. Read more and discuss here ... The post has 2 replies so far. Read more and discuss here ]]> Mon, 30 Jun 2008 18:09:46 -0400 http://forums.cabling-design.com/multicasting-across-segments-article40994-53.htm To anyone who has ever successfully configured multicasting between two segments on an ASA5510 v8.0... I have been working on this for three days, an...... The post has 3 replies so far. Read more and discuss here ... The post has 3 replies so far. Read more and discuss here ]]> Mon, 30 Jun 2008 14:10:24 -0400 http://forums.cabling-design.com/What-Box-is-suitable-article40992-53.htm Hi, we are looking for a new Security device. The Box should supply IPSec VPN for max. 25 User, AVInspection, IPS, support for two DSLLines. The Box...The post does not have any replies yet. Read more and discuss here The post does not have any replies yet. Read more and discuss here ]]> Mon, 30 Jun 2008 04:31:19 -0400 http://forums.cabling-design.com/Making-two-ports-perform-like-a-hub-article40990-53.htm Is this possible on Cisco switch 3750 or 2960 THX ... The post has 1 replies so far. Read more and discuss here ... The post has 1 replies so far. Read more and discuss here ]]> Sun, 29 Jun 2008 19:59:52 -0400 http://forums.cabling-design.com/A-nonCisco-router-BDCOM-1700-Router-Series-article40983-53.htm Hi Everybody, I have a router, noncisco brand, it is BDCOM 1710 Router Series, Made in China I used a console to connect to this router, Although i...The post does not have any replies yet. Read more and discuss here The post does not have any replies yet. Read more and discuss here ]]> Sat, 28 Jun 2008 04:27:02 -0400 http://forums.cabling-design.com/BGP-issues-article40979-53.htm Hi all,, I have Some issues In BGP as Following:: I need brief Explanation about what difference between Redistribute Connected Command and Network Co...... The post has 2 replies so far. Read more and discuss here ... The post has 2 replies so far. Read more and discuss here ]]> Fri, 27 Jun 2008 15:59:42 -0400 http://forums.cabling-design.com/I-cant-write-ACLs-article40969-53.htm Trying to block access from quotinsidequot to quotdmz1quot... interface Ethernet0/1 nameif inside securitylevel 100 ip address 192.168.1.1 255.255...... The post has 8 replies so far. Read more and discuss here ... The post has 8 replies so far. Read more and discuss here ]]> Thu, 26 Jun 2008 19:12:56 -0400 http://forums.cabling-design.com/Adjusting-EIGRP-metrics-article40962-53.htm Hi, I am trying to adjust the EIGRP metric of routes so a certain path is preferred: Router 1: router eigrp 1 redistribute connected network 10...... The post has 1 replies so far. Read more and discuss here ... The post has 1 replies so far. Read more and discuss here ]]> Thu, 26 Jun 2008 11:35:17 -0400 http://forums.cabling-design.com/MAC-000000000000-article40958-53.htm What is going on, My Vista home ultimate HP dv9000z notebook is sending LAN a MAC: 000000000000, I tested it with a fluke Lanmeter and verified that i...... The post has 2 replies so far. Read more and discuss here ... The post has 2 replies so far. Read more and discuss here ]]> Thu, 26 Jun 2008 00:41:03 -0400 http://forums.cabling-design.com/Standard-STP-convergence-time-article40956-53.htm stp convergence time 50s or 3050s why TIA, st ... The post has 7 replies so far. Read more and discuss here ... The post has 7 replies so far. Read more and discuss here ]]> Thu, 26 Jun 2008 00:04:37 -0400 http://forums.cabling-design.com/DNS-Reply-Modification-article40953-53.htm I have some ports forwarded to the outside interface on my ASA 5505. Here is an example: static (inside,outside) tcp interface pop3 192.168.1.2 pop3 ...... The post has 2 replies so far. Read more and discuss here ... The post has 2 replies so far. Read more and discuss here ]]> Wed, 25 Jun 2008 17:29:37 -0400 http://forums.cabling-design.com/Need-help-with-setting-up-L2TPv3-article40947-53.htm In configuring L2TPv3, Im getting: Jun 25 10:07:20.077: uid:43 Tnl/Sn 32862/8086 L2TP: Session state change from waitconnect to waitforserviceselecti...The post does not have any replies yet. Read more and discuss here The post does not have any replies yet. Read more and discuss here ]]> Wed, 25 Jun 2008 11:30:19 -0400 http://forums.cabling-design.com/ASA-licenses-article40946-53.htm Hi there Could anybody please put some light on the ASA license model For a PIX, there were interface and userbased licenses. The ASAs also have VP...... The post has 2 replies so far. Read more and discuss here ... The post has 2 replies so far. Read more and discuss here ]]> Wed, 25 Jun 2008 11:14:47 -0400 http://forums.cabling-design.com/Home-VOIP-Setup-article40944-53.htm I am looking to make a home VOIP network for a lab and was wondering what types of interface cards I would be needing to pull this off with an analog ...... The post has 2 replies so far. Read more and discuss here ... The post has 2 replies so far. Read more and discuss here ]]> Wed, 25 Jun 2008 10:04:32 -0400 http://forums.cabling-design.com/remove-vpn-link-PIX-501-article40943-53.htm Hi, I have some vpn L2L links between PIX 506 amp PIX501 I dont need at all. Is it enough to remove vpn link settings just on one firewall for insta...... The post has 1 replies so far. Read more and discuss here ... The post has 1 replies so far. Read more and discuss here ]]> Wed, 25 Jun 2008 08:31:00 -0400 http://forums.cabling-design.com/file-search-network-drive-consume-bandwidth-article40942-53.htm Hi, The file search on the network drive is causing bandwidth problem on our network. Is there any to block it or apply NBAR to it.Thanks... The post does not have any replies yet. Read more and discuss here The post does not have any replies yet. Read more and discuss here ]]> Wed, 25 Jun 2008 08:08:22 -0400 http://forums.cabling-design.com/Tacacs-authentication-login-with-password-input-tw-article40939-53.htm Im using tacacs to authenticate and authorize users for shell access to some routers. I have also a radius server to authenticate and authorize anothe...... The post has 2 replies so far. Read more and discuss here ... The post has 2 replies so far. Read more and discuss here ]]> Wed, 25 Jun 2008 02:19:05 -0400 http://forums.cabling-design.com/Weird-privilege-problem-article40929-53.htm Ok, Im new to this so bear with me. When I connect to one of our switches running ios vs 12.0 via the console, I am able to type commands normally. ...... The post has 6 replies so far. Read more and discuss here ... The post has 6 replies so far. Read more and discuss here ]]> Tue, 24 Jun 2008 15:18:03 -0400 http://forums.cabling-design.com/Cisco-877-Router--Multiple-IP-Addresses-article40927-53.htm Im a bit of a novice with Cisco routers, so please forgive me if I do not explain this clearly. Our company has a T1 line that connects through ...... The post has 2 replies so far. Read more and discuss here ... The post has 2 replies so far. Read more and discuss here ]]> Tue, 24 Jun 2008 12:42:31 -0400 http://forums.cabling-design.com/ASA-5510-QoS-article40926-53.htm Is there a way for an ASA 5510 to set DSCP on packets If not, how do I force each of the four physical interfaces to goto their quotrouterquot Heres...The post does not have any replies yet. Read more and discuss here The post does not have any replies yet. Read more and discuss here ]]> Tue, 24 Jun 2008 12:07:01 -0400 http://forums.cabling-design.com/SPAN--cisco-6500-article40923-53.htm Hello, I am trying to configure SPAN on a cisco 6509 cat switch, we are trying to configure ports based span, with three ports as source (which are c...... The post has 2 replies so far. Read more and discuss here ... The post has 2 replies so far. Read more and discuss here ]]> Tue, 24 Jun 2008 09:48:15 -0400 http://forums.cabling-design.com/SPAN-and-Ingress-traffic-on-3750-article40918-53.htm Should the ingress option allow me to connect to the host on the destination port with SPAN enabled. It isnt Session 1 Type : Loc...... The post has 3 replies so far. Read more and discuss here ... The post has 3 replies so far. Read more and discuss here ]]> Mon, 23 Jun 2008 18:22:58 -0400 http://forums.cabling-design.com/Network-Upgrade-Replacement-for-837-article40916-53.htm Hi, I have an 837 ADSL router running for a few years now, and my provider is telling me they are wanting to upgrade us to using ADSL2 which is not s...... The post has 2 replies so far. Read more and discuss here ... The post has 2 replies so far. Read more and discuss here ]]> Mon, 23 Jun 2008 17:49:59 -0400 http://forums.cabling-design.com/Network-upgrade-ASA-5505-configuration-article40915-53.htm Hi, I need to do some IP address rearanging on my Cisco ASA 5505 as I am currently not using NAT and I want to get it to a configuration where my ext...... The post has 2 replies so far. Read more and discuss here ... The post has 2 replies so far. Read more and discuss here ]]> Mon, 23 Jun 2008 17:48:42 -0400 http://forums.cabling-design.com/ASA-5520-HTTP-Slow-article40914-53.htm I recently removed a Checkpoint firewall at my host site and replaced it with an ASA 5250. All is going well, except for web traffic, which seems to b...The post does not have any replies yet. Read more and discuss here The post does not have any replies yet. Read more and discuss here ]]> Mon, 23 Jun 2008 15:05:55 -0400 http://forums.cabling-design.com/LANtoLAN-and-nat-within-article40913-53.htm Hi I going to create a lantolan (ipsec) to a third party, but they will not accept our ip adresses, so i need to hide in my public ip adress does any...The post does not have any replies yet. Read more and discuss here The post does not have any replies yet. Read more and discuss here ]]> Mon, 23 Jun 2008 14:55:26 -0400 http://forums.cabling-design.com/Broadband-Cisco-core-Network-article40909-53.htm Dear All, I have a project to implement a wired broadband data service within a building of 120 storeys and am a newbie in the broadband field. The eq...... The post has 2 replies so far. Read more and discuss here ... The post has 2 replies so far. Read more and discuss here ]]> Mon, 23 Jun 2008 05:42:57 -0400 http://forums.cabling-design.com/Call-Manager-install-article40904-53.htm Around March 12th I purchased Cisco Call Manager from an ebay offer. I received the software, I was expecting some instructions on how to install the ...... The post has 1 replies so far. Read more and discuss here ... The post has 1 replies so far. Read more and discuss here ]]> Sun, 22 Jun 2008 21:58:32 -0400 http://forums.cabling-design.com/network-documentation-software-article40901-53.htm Hi, Im wondering if anyone can suggest some software for keeping network documentation, we have a few hundred switches and a few thousand vlans and a...... The post has 6 replies so far. Read more and discuss here ... The post has 6 replies so far. Read more and discuss here ]]> Sun, 22 Jun 2008 20:49:43 -0400 http://forums.cabling-design.com/crashes-on-2801with-124(15)XZ-article40896-53.htm Since I have installed 12.4(15)XZ on my 2801, some 3 weeks ago, I am having 23 crashes every 24 hrs. When I look in the sh ver, I see: System returned...... The post has 4 replies so far. Read more and discuss here ... The post has 4 replies so far. Read more and discuss here ]]> Sat, 21 Jun 2008 04:18:06 -0400 http://forums.cabling-design.com/Cisco-2610xm-NM2V-and-VIC2FXO-article40894-53.htm I installed the NM and the VIC but do not get anything when I try and conifgure the voice ports. oiprtr(config)voiceport Inva...... The post has 1 replies so far. Read more and discuss here ... The post has 1 replies so far. Read more and discuss here ]]> Fri, 20 Jun 2008 21:52:37 -0400 http://forums.cabling-design.com/Cisco-2610xm-with-NM2V-and-vic2fxo-article40893-53.htm I installed the NM and the VIC but do not get anything when I try and conifgure the voice ports. oiprtr(config)voiceport Inva...The post does not have any replies yet. Read more and discuss here The post does not have any replies yet. Read more and discuss here ]]> Fri, 20 Jun 2008 21:50:29 -0400 http://forums.cabling-design.com/L2TPv3-and-vlans-article40892-53.htm Im trying to gain access to vlans at a remote ATMconnected site and assign them to ports on a switch at a central location. I need to do this for abou...The post does not have any replies yet. Read more and discuss here The post does not have any replies yet. Read more and discuss here ]]> Fri, 20 Jun 2008 12:02:57 -0400 http://forums.cabling-design.com/L2TPv3-tunnel-and-SSS-article40890-53.htm I think Im making some progress on my L2TPv3 tunnel project (between two 3640s, one connected via ATM at a remote site). It looks like the tunnel is b...The post does not have any replies yet. Read more and discuss here The post does not have any replies yet. Read more and discuss here ]]> Fri, 20 Jun 2008 09:25:25 -0400 http://forums.cabling-design.com/Problem-Configuring-NAT-on-ASA-5500-article40887-53.htm I am learning how to configure an ASA 5500. I am having a problem with NAT. It is my understanding that traffic will pass from a more secure interfa...... The post has 2 replies so far. Read more and discuss here ... The post has 2 replies so far. Read more and discuss here ]]> Thu, 19 Jun 2008 17:36:31 -0400