Hi All,
How do you get into programming mode on startalk 180 i know the meridian is feature * config, is there a similar thing ?
Thanks
John
Hi All,
How do you get into programming mode on startalk 180 i know the meridian is feature * config, is there a similar thing ?
Thanks
John
I my mind serves me correctly it is as follows'
Feature 983 Then you enter 1020000
I believe the first three digits are the admin mailbox number and the last four are the password. The system admin mailbox can vary according to what dn length the system has, 2 digits to 7 digits. If the mailboxes are 2 digit, then the mailbox is 12. If they are using 7 digit mailboxes, then the admin mailbox is 1000002. See example below;
DN Length Mailbox Logon Sequence 2 digit 12 F983 120000 3 digit 102 F983 1020000 4 digit 1002 F983 10020000 5 digit 10002 ................. 6 digit 100002 ..................... 7 digit 1000002 F983 10000020000
Hope this helps out. You can email me at snipped-for-privacy@nuvt.com if you need to.
Telwiz
Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.