1. Home
  2. Nortel Networks
  3. One touch dial module

One touch dial module

Nortel Meridian1 Option 11c

Hi,

We have several 2616 phones with an additional "module" attached that consists of a further 22 keys. Questions:

  1. What is the correct term for this "module"?
  2. Do these keys have exactly the same funtionality as the satndard 16 keys on a 2616?
  3. How do I program "one touch" phone numbers into these keys (and presumably the standard 16 keys)?

many thanks

ShuggyB

Reply to
ShuggyB
Loading thread data ...

Think I may have worked this out. Can someone confirm this is all correct?

Porgramming Speed Dials ========================

If you are programming speed dials on a 22 Key expansion module, make sure the module is enabled:

LD 11 REQ: PRT TYPE: TN TN

Look for AOM, it should be set to 1 (2 if there are 2 AOMs attached?). If it is set to 0, module is not enabled.

If you need to enable the 22 Key expansion module:

LD 11 REQ: CHG TYPE: 2616 ECHG: NO until AOM: 1 all the way out

To add speed dial number to a key:

LD 11 REQ: CHG TYPE: 2616 TN: ECHG: NO until KEY: XX ADL 16 Y..Y (where XX is the key to be programmed and Y..Y is the phone number (include 9 for outside line)) all the way out

thanks

ShuggyB

Reply to
ShuggyB

You are correct.

Reply to
John 807

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.