Nortel Baystack 425 HW rev 06 port 26.

Hi

We have a lot of baystack 425's here on hardware revision 05, they all function very well. Today I received 3 with hardware revision 06 and they all had a dis-functioning port 26. I tried the latest firmware revisions from the nortel site but nothing could help me. Is there anyone here that has seen the same problem before?

Jan Hugo Prins

Reply to
Jan Hugo Prins
Loading thread data ...

Just a thought ( you may have tried this already) but when the switch is enabled for stacking port 26 is disabled, even if it's not physically connected to a stack. If you issue a show stacking-mode command from the CLI interface is it set to standalone or stackable?

Pete

Reply to
PeteG

This was indeed the problem. After checking with colleges we found that teh default setting has changed with Switches that come preinstalled with Firmware 3.5.

Thanks, Jan Hugo Prins

Reply to
Jan Hugo Prins

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.