Is there any way to put "DND"(doo not disturb) on a station without using the Attendant Console? Any idea is welcome. Please post here for all to see.
Thanks
Is there any way to put "DND"(doo not disturb) on a station without using the Attendant Console? Any idea is welcome. Please post here for all to see.
Thanks
Do Not Disturb (DND) is controlled from an
Attendant Console. With PMSI enabled, it is possible to turn these lamp
conditions ON or OFF using the PMS computer.
Do Not Disturb:
SEt STatus DN DNd (ON)
SEt STatus DN DNd OFf
Pennyman
"crossbar" schreef in bericht news: snipped-for-privacy@4ax.com...
Thanks for the info. I have another plan to remedy this problem. I work at a hospital and there are times when calls to a patient room is not appropriate. At the present the console puts DND on the individual line/patient room and answers the call on the console. We are going to a different answering format using the STARTEL system that we installed. It is supposed to combine several operations into one easy system. We will see. BTW This system is an Opt 81C.
Thanks
Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.