Nortel BCM 1000 to 1000e expansion chassis cable
Bookmark this page:
 Yahoo!
 Google
 Windows Live
 del.icio.us
 digg
 Netscape
|
|
|||||||||||||
|
Posted by Bullfrog on June 23, 2006, 6:46 pm
Please log in for more thread options http://www.zones.com/cgi-bin/zones/site/product/index.html?id=000489530&zone=zbs and here http://www.shopping.com/xPF-Nortel_16_ft_V_24_Cable_NTAB3304 is V24 other connector D sub 25 pin female. The Cable I seek is an 8pin RJ45 to RJ45 is the description incorrect or am I seeking a different cable. Joining a BCM 1000 external 8pin RJ45 (Media services card) to a BCM1000E expansion cabinet. Thanks again Bullfrog Bullfrog wrote: >>-- cut
> > > > NTAB3304 = BCM DS256 Cable 5M. That is the correct part number from > > Nortel for the cable you are looking for. FYI. > > >
> > > | |||||||||||||
|
Posted by Bullfrog on June 23, 2006, 6:52 pm
Please log in for more thread options http://www.zones.com/cgi-bin/zones/site/product/index.html?id=000489530&zone=zbs and here http://www.shopping.com/xPF-Nortel_16_ft_V_24_Cable_NTAB3304 is V24 other connector D sub 25 pin female. The Cable I seek is an 8pin RJ45 to RJ45 is the description incorrect or am I seeking a different cable. Joining a BCM 1000 external 8pin RJ45 (Media services card) to a BCM1000E expansion cabinet. Thanks again Bullfrog Bullfrog wrote: > The NTAK cable on ebay has 50 pin Amphenol connectors on each end, not
> RJ45 connectors and is therefore not the correct cable. > > How can I confirm that the NTAB3304 cable I'm purchasing is the correct > RJ45 cable and not the D connector version. Anyone able to point me to > a supplier in either UK (preferably) or US , that is supplying the RJ45 > version with correct description.If in US I can get a friend to > purchase it for me and send over. > > Thanks again > > Bullfrog > >>-- cut
> > > > NTAB3304 = BCM DS256 Cable 5M. That is the correct part number from > > Nortel for the cable you are looking for. FYI. > > >
> > > | |||||||||||||
|
Posted by XBarNone on June 23, 2006, 8:19 pm
Please log in for more thread options I'm not sure of the part number but I can tell you what it is.
It is a standard 568b rj45 8 pin male both ends. 5 meters long (16 feet) sheilded 100 ohm balanced cat 5 e > Description for this cable here
http://www.zones.com/cgi-bin/zones/site/product/index.html?id=000489530&zone=zbs
> > and here
> http://www.shopping.com/xPF-Nortel_16_ft_V_24_Cable_NTAB3304 > is V24 other connector D sub 25 pin female. > The Cable I seek is an 8pin RJ45 to RJ45 is the description incorrect > or am I seeking a different cable. Joining a BCM 1000 external 8pin > RJ45 (Media services card) to a BCM1000E expansion cabinet. > > Thanks again > > Bullfrog > > > Bullfrog wrote: >> The NTAK cable on ebay has 50 pin Amphenol connectors on each end, not
>> RJ45 connectors and is therefore not the correct cable. >> >> How can I confirm that the NTAB3304 cable I'm purchasing is the correct >> RJ45 cable and not the D connector version. Anyone able to point me to >> a supplier in either UK (preferably) or US , that is supplying the RJ45 >> version with correct description.If in US I can get a friend to >> purchase it for me and send over. >> >> Thanks again >> >> Bullfrog >> >>>-- cut
>> > >> > NTAB3304 = BCM DS256 Cable 5M. That is the correct part number from >> > Nortel for the cable you are looking for. FYI. >> > > >> > > >
| |||||||||||||
|
Posted by acewarlock on June 24, 2006, 2:35 pm
Please log in for more thread options Sorry about giving you the wrong item number, but this seller does
have the cable your looking for and he was selling it for $4.99. look up this item number on Ebay 8830718453 and then send him an email question about the cable you want. It was brand new in the wrapper. XBarNone wrote: > I'm not sure of the part number but I can tell you what it is.
> > It is a standard 568b rj45 8 pin male both ends. 5 meters long (16 feet) > sheilded 100 ohm balanced cat 5 e > > > Description for this cable here
http://www.zones.com/cgi-bin/zones/site/product/index.html?id=000489530&zone=zbs
> > > > and here
> > http://www.shopping.com/xPF-Nortel_16_ft_V_24_Cable_NTAB3304 > > is V24 other connector D sub 25 pin female. > > The Cable I seek is an 8pin RJ45 to RJ45 is the description incorrect > > or am I seeking a different cable. Joining a BCM 1000 external 8pin > > RJ45 (Media services card) to a BCM1000E expansion cabinet. > > > > Thanks again > > > > Bullfrog > > > > > > Bullfrog wrote: > >> The NTAK cable on ebay has 50 pin Amphenol connectors on each end, not
> >> RJ45 connectors and is therefore not the correct cable. > >> > >> How can I confirm that the NTAB3304 cable I'm purchasing is the correct > >> RJ45 cable and not the D connector version. Anyone able to point me to > >> a supplier in either UK (preferably) or US , that is supplying the RJ45 > >> version with correct description.If in US I can get a friend to > >> purchase it for me and send over. > >> > >> Thanks again > >> > >> Bullfrog > >> > >>>-- cut > >> > > >> > NTAB3304 = BCM DS256 Cable 5M. That is the correct part number from > >> > Nortel for the cable you are looking for. FYI. > >> > > > >> > > > >
| |||||||||||||
|
Posted by CaptainReboot on July 3, 2006, 5:57 pm
Please log in for more thread options I have a feeling that you'll get away with using a different cable to
connect the cabs together as long as you don't put any BRIM's in there. I think that you'll get timing problems if you tried to use ISDN2. http://s13.invisionfree.com/nug - Nortel User Group > Hi
> > Apparently it is important when connecting a BCM 1000 or BCM400 to a 6 > bay expansion chassis, that the official 5 metre cat5 cable is > used.Apparently a standard one may give problems. > > This is the cable that links the 2 RJ45 DS256 ports together. > > I'm having trouble locating this cable - the only part number I can > find vaguely related is a NTAB3304 cable, but various internet > suppliers describe this as being a V24 DS256 cable with a D type > connection. So is evidently incorrect. > > Can anyone tell me the correct Nortel part number for the cable I seek? > > I could also do with tracking down the 50pin Amphenol type cable that > connects the media bays to the outside world. > > Thanks very much > > Bullfrog > | |||||||||||||
| Similar Threads | Posted |
| Nortel BCM 1000 to 1000e expansion chassis cable | June 23, 2006, 1:53 am |
| BCM 3.5 w/ a 1000 Chassis | June 22, 2005, 7:56 pm |
| Nortel Passport 8010 Chassis Error | November 16, 2005, 5:41 pm |
| Nortel BCM 1000 issue | October 21, 2007, 2:00 pm |
| Nortel BCM 1000 network connections | March 21, 2005, 5:13 pm |
| Nortel CMTS 1000 - passwor question | March 23, 2007, 1:07 pm |
| 1000E AND BRANCH | March 7, 2007, 9:49 am |
| Ip expansion | March 24, 2005, 3:38 pm |
| newbie - need help on expansion design on Option 11 | May 26, 2005, 10:29 am |
| cable com rs-232 to switch "baystack 350-24T" | May 12, 2008, 5:45 pm |
| Do you need a cross connect cable for call pilot 100? | June 14, 2007, 3:49 pm |
| Maximum cable length from bcm to digital handset | December 19, 2007, 6:15 am |
| CS 1000 Course | February 17, 2006, 4:33 am |
| bcm 1000 and set relocation | April 12, 2005, 10:34 am |
| BCM 1000 3.0 bootup | August 18, 2005, 3:25 pm |
> RJ45 connectors and is therefore not the correct cable.
>
> How can I confirm that the NTAB3304 cable I'm purchasing is the correct
> RJ45 cable and not the D connector version. Anyone able to point me to
> a supplier in either UK (preferably) or US , that is supplying the RJ45
> version with correct description.If in US I can get a friend to
> purchase it for me and send over.
>
> Thanks again
>
> Bullfrog
>