|
Posted by Will on June 11, 2008, 12:18 am
Please log in for more thread options
We have a service processor for the OM3500 with a locked / unknown admin
password. We have not had luck in getting the card to reset its
configuration when inserting it to a new shelf. Is there a command we can
issue prior to logging in that would give the installed software release on
the card?
--
Will
|
| Similar Threads | Posted |
| Determining Software Release on OM3500 Service Processor | June 11, 2008, 12:18 am |
| Resetting Service Processor in OPTera 3500 | February 20, 2006, 10:54 pm |
| Nam Release 2 | January 12, 2006, 6:19 pm |
| Release 4.5 Doc CD's | December 28, 2005, 7:51 am |
| Nortel PP 15K UNI 3.1 rate of release | April 28, 2006, 9:20 pm |
| Meridian Option 81C Release 5 | September 9, 2007, 10:36 am |
| On the Meridian PBX X1126xxx was just the working title for Release 3., right? | January 19, 2006, 7:00 pm |
| Upgrading Nortel Passport 8600 from Release 3.1.5.0 to 4.1.1 | October 24, 2006, 6:52 am |
| Call Pilot Release 4.0 causing NIC to have constant tfarric. | April 25, 2006, 1:43 pm |
| QoS service Configuration | April 7, 2006, 11:31 am |
| Looking for a service vendor | August 11, 2006, 11:23 am |
| Night Service | June 6, 2007, 12:25 pm |
| Flash 2.0 4 Port CCR Question PRI Service | March 29, 2006, 6:33 am |
| Target lines always busy on PRI Service | March 29, 2006, 6:45 am |
| Need recommendation on continued service in Dallas, Tx | March 2, 2007, 6:51 pm |
Determining Software Release on OM3500 Service Processor
Yahoo!
Google
Windows Live
del.icio.us
digg
Netscape
