D-channel requirement for TDMI on Option 11C
Bookmark this page:
 Yahoo!
 Google
 Windows Live
 del.icio.us
 digg
 Netscape
|
|
|||||||||||||
|
Posted by on August 31, 2007, 3:26 pm
Please log in for more thread options have asked for a quote for a TDMI card and D-channel daughterboard. The vendor tells us that since we are at Call Server VERSION 2121 RELEASE 3 ISSUE 00, we don't need D-channel hardware. It's now covered in the s/w - System Limits excerpt: DCH 80 LEFT 79 USED 1 TMDI D-CHANNELS 64 LEFT 63 USED 1 True? No hardware required for a D-channel?? thanks, | |||||||||||||
|
Posted by Bill on August 31, 2007, 5:41 pm
Please log in for more thread options True If you've got a TMDI card, and at least one TMDI D-Channel ISM available (you do, according to the posted info!), then you just program the hardware that is already present on the TMDI card. It looks like you've already got a TMDI D-Channel, and a regular D-Channel programmed in the switch. It programs as a MSDL. Card x (the slot the TMDI lives in), port 0. On another note: Assuming you've already got a T1 going somewhere else, you won't need a clock controller either. If the other switch has no T1's going anywhere, it will need a clock controller, and you will want to slave it off of this carrier. If it also already has a T1 going to some sort of Public switch - Telco, MCI, etc. - and the switch you are at now does the same, you are already all set for timing. | |||||||||||||
| Similar Threads | Posted |
| D-channel requirement for TDMI on Option 11C | August 31, 2007, 3:26 pm |
| Option 11 - Symposium - Abandoned calls not an option | January 24, 2006, 3:13 pm |
| Option 11 Rls 18 Pri | February 13, 2006, 8:55 am |
| Option 11 on LAN | December 20, 2006, 8:29 pm |
| INI procedure for Option 81C | April 22, 2005, 1:20 am |
| FS: Meridian Option 11C PBX | June 26, 2005, 10:02 am |
| Meridian 1 option 61c | March 31, 2006, 3:49 pm |
| Option 11 and IP Telephoney | May 21, 2006, 8:57 pm |
| Option 11 -interalia | March 15, 2007, 1:43 pm |
| T1 Timing on an OPTION 11 | November 22, 2005, 12:08 am |
| Option 11 VAncouver BC | March 11, 2007, 8:45 pm |
| Option 11 VAncouver BC | March 11, 2007, 8:46 pm |
| Nortel Option 11c | November 12, 2007, 2:06 pm |
| Help!!!! COT Trunk access on Option 11 | March 15, 2005, 1:54 pm |
| Possible to page through sets on an Option 11? | April 27, 2005, 11:11 pm |
> have asked for a quote for a TDMI card and D-channel daughterboard.
> The vendor tells us that since we are at Call Server VERSION 2121
> RELEASE 3 ISSUE 00, we don't need D-channel hardware. It's now
> covered in the s/w - System Limits excerpt:
> DCH 80 LEFT 79 USED 1
> TMDI D-CHANNELS 64 LEFT 63 USED 1
>
> True? No hardware required for a D-channel??
>
> thanks,