Can you add a "real server" to many vips using the same port?
Bookmark this page:
 Yahoo!
 Google
 Windows Live
 del.icio.us
 digg
 Netscape
|
|
|||||||||||||
|
Posted by Fred Jimally on April 20, 2005, 2:00 pm
Please log in for more thread options Hi, I am wanting to add the same "real servers" to 2 different VIP's on an Alteon 180e, as below. VIP 1 10.0.0.1 port 110 - Group 1 -- "real server 1" 10.0.1.1 port 110 -- "real server 2" 10.0.1.2 port 110 VIP 2 10.0.0.2 port 110 - Group 2 (or not, can be Group 1 but preferably a differnet group) -- "real server 1" 10.0.1.1 port 110 -- "real server 2" 10.0.1.2 port 110 Please any help would be greatly appreciated as I am new to the Alteon's. Thanks Fred | |||||||||||||
|
Posted by Angler on April 21, 2005, 8:03 pm
Please log in for more thread options This is possible but you have to enable direct access mode first, "/cfg/slb/adv/dir en". Either that or give your real servers secondary IPs and use those for group 2. Angler Fred Jimally wrote: | |||||||||||||
| Similar Threads | Posted |
| Can you add a "real server" to many vips using the same port? | April 20, 2005, 2:00 pm |
| Signaling Server interwork with Pingtel SIP Server | November 11, 2005, 2:02 am |
| Alteon 180E + WebOS 9.0: can't redirect port 80 to port 81 | March 20, 2006, 11:13 pm |
| AD3 real servers see virtual IP | April 27, 2005, 4:56 pm |
| Voice Network Real Time Monitoring | April 15, 2005, 10:42 am |
| new queue not showing Real time stats | February 1, 2007, 3:05 pm |
| SNMP query for real servers on Alteon. | June 8, 2007, 6:20 am |
| Phantom calls in Symposium 5.0 Real Time display | March 2, 2006, 7:02 pm |
| 802.3ad MLT to server | May 31, 2006, 9:30 am |
| How do you back up a Signaling Server? | April 24, 2006, 1:41 pm |
| Commands for the signaling server rls 4.5 | October 26, 2006, 3:52 am |
| TM 3.0 server remote access | January 17, 2007, 4:22 pm |
| signaling server error | February 8, 2007, 9:50 am |
| Unable to connect to the Symposium Server | May 11, 2005, 6:25 pm |
| Nortel VPN client not getting DNS server addresses | October 3, 2005, 2:33 am |
>
> I am wanting to add the same "real servers" to 2 different VIP's on an
> Alteon 180e, as below.
>
> VIP 1 10.0.0.1 port 110 -
> Group 1
> -- "real server 1" 10.0.1.1 port 110
> -- "real server 2" 10.0.1.2 port 110
>
> VIP 2 10.0.0.2 port 110 -
> Group 2 (or not, can be Group 1 but preferably a differnet
> group)
> -- "real server 1" 10.0.1.1 port 110
> -- "real server 2" 10.0.1.2 port 110
>
> Please any help would be greatly appreciated as I am new to the
> Alteon's.
>
> Thanks
> Fred