CallPilot Help (Digial Networking VPIM)
Bookmark this page:
 Yahoo!
 Google
 Windows Live
 del.icio.us
 digg
 Netscape
|
|
|||||||||||||
|
Posted by BCMMike on September 25, 2006, 12:10 pm
Please log in for more thread options use centralized voicemail at one site, all BCM 200s. Problem is the MWI doesn't work at the remote site because Callpilot wasn't designed to pass these signals over the trunk ..FINE. I get the Eval key for AMIS / Digial Networking and I figure if I put a Network Mailbox at the main site (Think centralized voicemail) that the message would copy itself to the remote site and set the MWI to ON. At the main site the receptionest tries to 'Transfer to Voicemail' to the Network mailbox | |||||||||||||
|
Posted by BCMMike on September 25, 2006, 12:28 pm
Please log in for more thread options To give you a bit of background of what I have going on I am trying to use centralized voicemail at one site, all BCM 200s. Problem is the MWI doesn't work at the remote site because Callpilot wasn't designed to pass these signals over the trunk ..FINE. I get the Eval key for AMIS / Digial Networking and I figure if I put a Network Mailbox at the main site (Think centralized voicemail) that the message would copy itself to the remote site and set the MWI to ON. At the main site the receptionest tries to 'Transfer to Voicemail' to the Network mailbox on that system. It says 'Wrong Mailbox Type'. Is the Digital Network not designed to work with the transfer to voicemail function? | |||||||||||||
|
Posted by Nazule on September 29, 2006, 12:19 pm
Please log in for more thread options Nortel's BCM products do not send feature commands outside of the local
machine. So F98X for transfer to mailbox will not work. You could have her transfer to the networked mail port DN and then drop them in but it's not clean. | |||||||||||||
