Latest threads in Nortel Networksshow only best voted threads
| Subject | Author | Posted | Replies | |
|---|---|---|---|---|
|
|
Switch o/s multi-threading
Hi, Could someone familiar with the Nortel BPS 2000 and Baystack 450 switches tell me which firmware and O/S versions will support multi- threaded processes? I'm interested in whether the SNMP agent...
—
|
15 years ago
|
— | |
|
|
Looking for Passport 1000 series boot monitor update (version 2.1.0.0)
I own a Passport 1200, for which I have two 1298 SSFs. One SSF runs software version 2.0.5.5, and the other runs 2.1.0.0. I would like to update the older SSF to 2.1.0.0, but it can't boot the...
—
|
15 years ago
|
— | |
|
|
Building and EDS
I have to build a Nortel EDS Server for the CS2100 Platform and If anyone who has done this that can share some insights, do's and dont's etc. I have very little information on this , other than a...
—
|
15 years ago
|
— | |
|
|
VPN problem with Nortel Contivity Client V04_86.102
Hi, I am having a strange problem while VPN-ing using NCC V04_86.102 over verizon FIOS. First, it would not connect at all so I went into my router settings and enabled IPSEC. After this I was able to...
—
|
15 years ago
|
— | |
|
|
Adtran tsu-120 and MICS 1.1
Got a customer with this config, who is getting dsx slip errors. They are splitting the T1. T1 is point to point. There are no complaints except for the error led on the dsx interface. The MICS shows...
—
|
15 years ago
|
— | |
|
|
BCM & CRM Screen Pops & Dialing
New from ConverTec! **** CRM Integrator for BCM & Norstar **** What is it? An Integration Toolbar for popular CRM=92s that allows inbound calls to automatically search the Phone Number for matching...
—
|
15 years ago
|
— | |
|
|
Contivity 1600
Someone has requested that I configure SNMP traps for their Contivity in our NMS. I do not have any mibs for that device. Can someone please provide me a link where I can download them? Thanks, Chris
—
|
15 years ago
|
— | |
|
|
1120E IP phone
I have set up DHCP server with scopes for data vlan 401 (network 10.1.1.0 /22) and voice vlan 990 (network 172.30.1.0 / 22). The DHCP server is on the network 10.1.1.0 and it issues addresses OK to...
1
|
15 years ago
|
1 | |
|
|
Nortel PBX - Cisco phone
Is it possible to use Cisco 7941G phones on a Nortel PBX? I am using Nortel 1120 phones but I also have some Cisco phones available to me. Is it easy, difficult, not possible? Thanks, Ned
—
|
15 years ago
|
— | |
|
|
load balancing issue
I have the following issue with this load balancing algorythm using FW LB application redirection type setup The lb algorythm is based on hash (sticky sip) and filters, hash is used sip on ingress...
—
|
15 years ago
|
— | |
|
|
Nortel 2002 VOIP phone reset
Anyone know how to factory reset the settings of the Nortel 2002 voip phone?
—
|
15 years ago
|
— | |
|
|
NRU 10 missing MAP File
I am running NRU 10 on a MICS 6.1 system and its giving me an error message: Map file: 'AOF01ENG' is required. Does anyone have a copy of that MAP file? Thanks Bruce
2
|
15 years ago
|
2 | |
|
|
VOIP Gateway for old Norstar system?
I have an old Norstar 6x16 system w/ Compact DR5 software at work. I have high speed Internet at work and home. Are there any gateways available that will allow me to add a 7310 or equiv. phone at...
6
|
15 years ago
|
6 | |
|
|
I can't Create new NPA under ac2 - ESN073
I'm trying to set up 10-digit dialing on my PBX. I can't tell you exactly what version I'm working on. Everything that I'm reading says that I need to add a NPA. well I try to do this on ac2 and I get...
2
|
15 years ago
|
2 | |
|
|
BCM 400 swap IP set for T7316
I am trying to change a phone from an IP set to a T7316. I have de-registered the IP DN, how do I get the T7316 to be the IP set's old DN? Any help would be greatly appreciated! Rob
—
|
15 years ago
|
— |