460 24T-PWR switch and fiber issue...
Bookmark this page:
 Yahoo!
 Google
 Windows Live
 del.icio.us
 digg
 Netscape
|
|
|||||||||||||
|
Posted by nortel help on February 1, 2006, 6:43 pm
Please log in for more thread options router. The fiber port on the router is enabled and the fiber is plugged in. On the MDA on the switch I see a LINK ligt solid and an ACTIVITY light that blinks every few seconds once.....not blinking like the activity light on my other switches though, those blink fast. If I switch the fiber around on the router the lights on the MDA go out so I put them back the way they were and have lights again. I however can not ping the switch and anyhting that is plugged into the switch is not getting out. Does something need to be gturned on on the switch itself using console? Any other ideas? suggestions? thanks | |||||||||||||
|
Posted by gopher on February 2, 2006, 2:36 pm
Please log in for more thread options still same issue. The fibre had degraded and needed cleaning. Hello I've got an MDA and a fiber running from a 460 switch to a nortel router. The fiber port on the router is enabled and the fiber is plugged in. On the MDA on the switch I see a LINK ligt solid and an ACTIVITY light that blinks every few seconds once.....not blinking like the activity light on my other switches though, those blink fast. If I switch the fiber around on the router the lights on the MDA go out so I put them back the way they were and have lights again. I however can not ping the switch and anyhting that is plugged into the switch is not getting out. Does something need to be gturned on on the switch itself using console? Any other ideas? suggestions? thanks | |||||||||||||
|
Posted by nortel help on February 2, 2006, 4:18 pm
Please log in for more thread options this is a new fiber cable. I can try to switch pairs
gopher wrote: | |||||||||||||
|
Posted by nortel help on February 4, 2006, 8:56 pm
Please log in for more thread options OK I have switched pairs....now on my router the lights light up green,
but very faint, not like the other fiber lights that are bright green. The light on the routers end is no longer orange, but now faint green. nortel help wrote: > this is a new fiber cable. I can try to switch pairs
> > gopher wrote: > > Had the same problem recently with SMLT. All hardware was swapped, but
> > still same issue. The fibre had degraded and needed cleaning. > > > > > > Hello I've got an MDA and a fiber running from a 460 switch to a nortel > > router. The fiber port on the router is enabled and the fiber is > > plugged in. > > > > On the MDA on the switch I see a LINK ligt solid and an ACTIVITY light > > that blinks every few seconds once.....not blinking like the activity > > light on my other switches though, those blink fast. > > > > If I switch the fiber around on the router the lights on the MDA go out > > so I put them back the way they were and have lights again. > > > > I however can not ping the switch and anyhting that is plugged into the > > switch is not getting out. Does something need to be gturned on on the > > switch itself using console? > > > > Any other ideas? suggestions? thanks | |||||||||||||
| Similar Threads | Posted |
| 460 24T-PWR switch and fiber issue... | February 1, 2006, 6:43 pm |
| Nortel option 21 to MCR via fiber | October 20, 2005, 7:59 am |
| Baystack 470's and Fiber | January 12, 2007, 12:32 pm |
| Wich fiber connector do I need? | March 21, 2007, 12:08 pm |
| PP8600 fiber ports failing | February 15, 2005, 4:23 pm |
| Baystack 460-24T-PWR Fiber Optic Module poblems | August 4, 2005, 4:45 pm |
| Norstar MICS Fiber ASM Technical Expertise Required | April 2, 2006, 9:18 am |
| BCM BRU issue | July 3, 2005, 9:24 pm |
| Timer Issue??? | March 14, 2005, 5:32 pm |
| OTM 2.2 configuration issue? | February 23, 2006, 10:35 am |
| Caller Id Issue | March 6, 2006, 12:33 pm |
| i2002 DHCP issue | June 23, 2005, 7:37 am |
| Traceroute issue with NAT on 2208 | July 17, 2006, 5:08 pm |
| Norstar access issue | April 24, 2007, 11:02 am |
| Nortel BCM 1000 issue | October 21, 2007, 2:00 pm |
> still same issue. The fibre had degraded and needed cleaning.
>
>
> Hello I've got an MDA and a fiber running from a 460 switch to a nortel
> router. The fiber port on the router is enabled and the fiber is
> plugged in.
>
> On the MDA on the switch I see a LINK ligt solid and an ACTIVITY light
> that blinks every few seconds once.....not blinking like the activity
> light on my other switches though, those blink fast.
>
> If I switch the fiber around on the router the lights on the MDA go out
> so I put them back the way they were and have lights again.
>
> I however can not ping the switch and anyhting that is plugged into the
> switch is not getting out. Does something need to be gturned on on the
> switch itself using console?
>
> Any other ideas? suggestions? thanks