Latest threads in Nortel Networksshow only best voted threads
Subject | Author | Posted | Replies | |
---|---|---|---|---|
|
NTJT29xx Cards
I have several questions on the NTJT29xx subscriber Svc card used in the Service Edge 5500 routers: - There are versions of this card with and without 3DES encryption. Can you use the 3DES cards...
—
|
17 years ago
|
— | |
|
Internal Transfers
Good morning, We're having a problem with a particular telephone number here on-site. Someone is transferring calls for orders to extension 7565 instead of CDN 3565. At least that is my assumption...
1
|
17 years ago
|
1 | |
|
Backup Baystack 350T
Hello, I'm a newbee, i want to backup with scripts Baystack 350 T. I thought of this scripts: but after login, i don't know: #! /usr/bin/perl -w sub Connect { $PE = ('xxx.xxx.xxx.xxx'); $PasswordPe =...
2
|
17 years ago
|
2 | |
|
Callpilot 100 issues
Newbee here . . 1st callpilot instalation . . . I got the callpilot 100 with 6x16 system integraded it works -! I have fiew questions issues: 1 - if internal user dials extension then voice mail does...
—
|
17 years ago
|
— | |
|
One touch dial module
Nortel Meridian1 Option 11c Hi, We have several 2616 phones with an additional "module" attached that consists of a further 22 keys. Questions: 1. What is the correct term for this "module"? 2. Do...
2
|
17 years ago
|
2 | |
|
Caller Id Discarded on Option 11C
Hello All, I'm currently having an issue when starting a call will a caller ID greater than 14 digits, the receiving party gets the call through a TAPI server, but the caller ID is set to (null), thus...
—
|
17 years ago
|
— | |
|
snmp traps fro cpu, buffers and memory usage
Hello, Is it possible that Nortel routers are sending information about cpu, buffers and memory usage via SNMP traps? Which entity is used for that? Thanks in advance, Ivana
—
|
17 years ago
|
— | |
|
MCR Troubles
We have an MCR key on two dozen phones for an internal call center. People inside the company can call this team that shares the MCR key and all their phones ring at once. I offered to set them up on...
5
|
17 years ago
|
5 | |
|
Passport 7480 Static Ecmp
Hi, We have a passport 7480 running 7.2, and just want to configure static route ecmp with Cisco 2600, via E1 interface. From traffic monitor, we can see packets being sent from Cisco are shared. (We...
—
|
17 years ago
|
— | |
|
Nortel BCM and RCC (Reporting for Call Centres) Data Feeds
Hi, We have a Nortel BCM running 3.6 build 2.2c, prior to upgrading to 3.6 we used to use the Nortel Call Centre Reporting application and we purchased a 32" TFT to display the call centre stats to...
—
|
17 years ago
|
— | |
|
Call Pilot in Lotus Notes Freezes
I am running Call Pilot Unified Messaging in Lotus Notes and I have the consistent problem that the client freezes when playing a message. It generally gets about 10 seconds into the message and...
—
|
17 years ago
|
— | |
|
install PRI2 / Qsig
Hi I have fitted a new PRI and enter done the LD 17 CHG CEQU then allocate the slot any idea where i go from here Regards The Riddler
—
|
17 years ago
|
— | |
|
Getting a phone to ring on a Norstar system
Hi All! This is probably a very easy question. Tho it has us stumped here. About a year ago, we setup our phones so that 3 of the 7 phones will ring. We currently have 3 lines that the main line will...
1
|
17 years ago
|
1 | |
|
Creating or obtaining recovery disk for Contivity 1600
I've obtained a Nortel Contivity 1600 from ebay. It looks OK, but is missing the hard disk so it won't boot. From reading the docs on the CD, it looks like I need to boot from a "recovery diskette" to...
—
|
17 years ago
|
— | |
|
IP Phone Configuration
I've run across a couple of issues that could be considered design errors on Nortel's part. I've received the all too familiar answer "design intent". They both relate to full DHCP mode. Out of the...
2
|
17 years ago
|
2 |