Latest threads in Nortel Networksshow only best voted threads

Subject Author Posted Replies
 
LD 59 and 89
G'Day, Does anyone know why we can load overlays 55 and 89, but there is no documentation associated with it in the standard MERL/NTP's. I am running and 81C with 25.40. TMF013 . MCR004 .
1
1
 
Upgrading Nortel Passport 8600 from Release 3.1.5.0 to 4.1.1
The Release notes for Release 4.1.1 state:- "Loading a Release 4.1.1 configuration file on a 3.0.x, 3.1.x, 3.2.x or 3.3.x run-time image generates errors and causes the image to stop loading the...
2
2
 
Printing Fax from Callpilot
Has somebody found a solution to print automatically incomming fax to a network-printer ? We use the callpilot with Exchange 2003. Thanks in advance for any help. Best regards Ralf
 
XMWK button and the MWI
I made some changes to a few dozen phonesets on campus last week. I added an XMWK button as well as the class of service LMPX. The problem I've run into is that on some phones (just a half dozen or...
6
6
 
Does anyone know how to get the current version of the i2050 smart phone
I am currently running 1.40.0363 and It has a lot of bugs. Any help would be great... Thanks scott
2
2
 
CallPilot Message Forwarding Rule
Good morning, Has anyone else successfully configured CallPilot's "Message Forwarding Rule"? I followed all the docs but when I look at the user's mailbox whose messages I'd like to have forwarded it...
4
4
 
802.1x Supplicant Running on a SOHO NAT Device
We wish to force 802.1x on all our edge switches (5500s). The catch is that we do not have any real control over what is connected to the network edge. We have game console systems, old *nix machines,...
 
Transparent Failover support with Nortel Alteon Load balancers??
I am currently checking the usage of Nortel Load balancer:'Nortel Alteon' 2208/3408. I would like to know whether these load balancers provide the support for Transparent Failover. Assume there are 2...
4
4
 
Symposium Express (SECC) vs. Citrix
In the final stages of negotiating purchase of Symposium Express for ACD call center (Nortel CS1000M PBX, CallPilot), I've been told we must go up to full blown Symposium (vs. SECC) due to the fact...
 
VPN tunnel established but having problems getting to web
I have a setup a VPN tunnel from home office to remote site using checkpoint at home site and a netgear fvs318 at remote..everything goes fine until the VPN tunnel is started..I can get to each others...
 
CES 1100 and Secondary IP Addresses
I have a CES1100 and I would like to assign a secondary private IP address so that users on my second subnet can use this switch as a gateway. This isn't thier main gateway, I just use it for routing...
 
Contivity VPN Connectivity Issues WIth D-Link Router
Please disregard this post. Subsequently I discovered that the connectivity problems were due to the fact that I was remotely administering the computer: the DI-604 works just fine for establishing a...
7
7
 
Symposium 6.0 / Call Center 6.0
Looking for a Symposium 6.0 / CC 6.0 Guru preferably in the Orlando area. Thanks, StinkMan
 
Nortel M7324 - Can't get the phone to ring
Hello I need help figuring out how to get my phone to ring. Here is the setup 4 phones, 6 incoming lines 1 phone is main reception, all calls go through there. The others will hear the phone ring but...
 
VPN configuration trouble on Nortel Contivity 1010
Bear with me, as I'm new to the Nortel and its configuration. Essentially, a location has a Nortel Contivity 1010 that is set up with the branch office connection to another site, this connection...
1
1