Latest threads in Nortel Networksshow only best voted threads

Subject Author Posted Replies
 
Bad port on 470-48T switch
I have a cascaded stack of 3 of these 470-48T switches that I just put out. Just put these out about 2 weeks ago and started to migrate from my old switches to them. On the base unit, one of the ports...
5
5
 
VoiP BCM 50 Help
Having a problem getting our two BCM 50's to connect for VoiP service. We programmed a VPN on the intergrated router to point the LAN addresses to their counterpart and it doesn't seem to do the...
2
2
 
CallPilot Reporter error
During setup of Call Pilot reporter on a standalone web server I get the following error message THE PROCEDURE ENTRY POINT GET PROCESS IMAGE FILE NAME W COULD NOT BE LOCATED IN THE DYNAMIC LINK...
1
1
 
Default User & PW for I.P. Signalling Server
Hi Everyone, Just wondering if anyone has these? I want to reset our development Lab Signalling Server but I can't find the damn defaults anywhere in all my notes or with that stupid Helmsman thing....
1
1
 
Do you need a cross connect cable for call pilot 100?
I was told I needed a cross connect cable in order to hook my laptop to our call pilot system. Connecting the Call Pilot into the router with a static IP does not allow me to connect to the Call Pilot...
2
2
 
Looking for Millenium Power Connector
Im looking for a power connector for a Millenium payphone in the museum's collection so that it can be shown with its display lighted on display. I realize that it won't be able to be used for...
 
Deny external calls...
Hello, We have a norstar modular ICS set up at my workplace and I was wondering if its posible to prevent external callers reaching an internal extension after dialing it in the automated attendants...
4
4
 
nortel 8600 bandwidth
I've problem how to set up bandwidth on one brouter port, when I want to set up by command "config ethernet 7/7 speed 10", I get info "Error: port 7/7, Can't set admin speed on this port". And mabye...
4
4
 
ERS 8600, simple setup, IP, VLANs, etc.
Hi I am looking at a relatively simple setup: a dozen networks, each with its own switch and /24 IP subnet are linked to one router which has a link to the campus net. The root router is an 8600 and...
5
5
 
SNMP query for real servers on Alteon.
Hi, I need to know if there's the way to check alteon snmp to obtain the list of all real servers enabled in a specified group. It's possible? Thanks.
2
2
 
muxing T1's vs DS-3
what options are available from the carriers for the local loop into either an old Frame or new MPLS network when we need more than a single T1, but less than a DS-3 What about the copper vs fiber...
9
9
 
BCM50 + BCM400 vs SRG survivability
for networking several small locations with BCM50 or BCM400 how are things impacted if the links go down ? one comment mentioned the SRG - but that only works with the CS1000 ?
 
muxing T1's for higher speed
what Nortel product can we use to mux up some T1's to support higher than 1.5mbps or how can we get more than a T1 to a remote location for sending medical scan images ?
 
Cabling IP Phones with PoE 802.3af
Hello, to power an IP Phone 1120E over the LAN, do I have the choice to: -power the phone over 4 wire only or do I need -8 wires If I understand it right, 802.3af includes both methods. The PoE-Switch...
1
1
 
Night Service
Hi, Our Night Service has NIT1 200 TIM1 1800 I presume this means the Night Service starts at 18:00 and rings at DN 200? Our Night Service actually rings a bell on one of our floors and some users can...
1
1