Latest threads in Nortel Networksshow only best voted threads
Subject | Author | Posted | Replies | |
---|---|---|---|---|
|
Reset Tasman 1450 router to factory default
Newbie here. We recently purchased a used Tasman 1450 router and I need to reset this unit to factory default. I've checked documentation from Nortel's website but could not find anything. Does anyone...
—
|
16 years ago
|
— | |
|
Ringing group voicemail question
We are running MICS with Call Pilot... There are several extensions set to ring for incoming calls along with the switchboard operator extension. After 4 rings, if nobody answers it goes to the...
2
|
16 years ago
|
2 | |
|
IP phone setup remote location
Hi all, Not sure if this is the correct group but here is my question, we have a BCM40 here and I'm setting up 2 (or maybe 3) IP phones at a remote location. I set up an IPSEC vpn tunnel through the...
3
|
16 years ago
|
3 | |
|
Monitoring Merdian option 11
Does anyone know of any software monitoring services like nagios that would be able to monitor a pbx maybe make an outbound call every 10 minutes or so to an external number to make sure that the PRI...
1
|
16 years ago
|
1 | |
|
Does Meridan Mail support an audible message waiting indicator
Some one suggested that there was a way to make the phone emit an intermittent audible tone in addition to the message waiting light being on, fact or myth? I hope this is not a myth Thanks to any one...
5
|
16 years ago
|
5 | |
|
Uploading BCM 3.7 patches through a firewall
Hi guys, Does anyone know what ports you need to allow through in order to upload patches to a Nortel BCM 3.7 system? I have a system (BCM400 v3.7) that I can access remotely (firewall is open for...
4
|
16 years ago
|
4 | |
|
SHARED TECHNOLOGIES INC. - WE'D LOVE TO HELP!!
Are you looking for an EXCEPTIONAL Nortel Partner to handle all of your design, engineering, integration, implementation and maintenance needs. I'm Mikki Greene and I have joined this Nortel Users...
—
|
16 years ago
|
— | |
|
NAM 4 interesting problem
Customer, one lawyer out of 30-40. Bitch is used by coworkers !!! Call in from outside get 4-5 new messages and some saved messages. Check from set get x new messages. Saved messages, we know she has...
—
|
16 years ago
|
— | |
|
CDR Pull
Hi... I will make a CDR Pull application for BCM 40.. you know which commands use the CDR Pull? anyone have an example for CDR Client software? Thanks..
—
|
16 years ago
|
— | |
|
vlan and qos
I have a nortel 3510-24t HW:32 FW:4.0.0.7 SW:v4.0.4.00 I have 128 public ip on an ethernet cable connected to the switch. I would like to create 4 subnet of 32 ip and assign every subnet to a specific...
1
|
16 years ago
|
1 | |
|
How to change Bridge Priority
How can I change the "Bridge Priority" of a Nortel 450T Switch ?
2
|
16 years ago
|
2 | |
|
Call pilot 4.0 ring no answer on voice mail
We get occasional ring no answers on Call Pilot 4.0 from internal users calling voice mail. Anyone else experienced this and found resolution? Thx again gang, John
3
|
16 years ago
|
3 | |
|
changing my byPort vlan to byProtocol ??
I've got a stack of 3 switchers and some by Port vlans setup. My MACS are not able to use Appletalk I'm guessing because I am not using byProtocol vlans. If I hook my mac up to the old switches using...
1
|
16 years ago
|
1 | |
|
how to add an extension to CDP
we have a nortel meridian 11c. I have moved a user from site 1 to site 2. each site has its own nortel system. the user wants to keep his extension. I have outed his extension at the original site,...
—
|
16 years ago
|
— | |
|
Get TN without toning the line?
We just moved into a temporary space and I need to configure one of the phones. As this move was done quickly, in the wee hours, we don't have a good map of TNs to phones. Is there a way I can...
9
|
16 years ago
|
9 |