Latest threads in Nortel Networksshow only best voted threads

Subject Author Posted Replies
 
DTMF on PRI
Hi all, i have to setup some specific dialout setup only with ISDN PRI. I need to dial my one PRI on DTMF (Digit by digit) rather sending out whole number as message, Can somebody did that ? or guide...
1
1
 
FS: Norstar MICS, plus (1) 12x0, (2) 0x16
Removed from working service 2003, in storage since. 4.1 (I think) software main chassis; 3 line cards (probably DS, might be one CID or DID) 6-port expansion card 12x0 chassis 2 'DS' line cards 0x16...
2
2
 
Contivity 2700 Ver V06_00.151
Occasionally the HTTP interface hangs on me and I cannot access the management interface. So far it has come back on its own but usually takes a few hours to do this. Its happened both running reports...
 
Nortel 8300 and slow performance after delay
We have two Nortel 8300's with split multi link trunking (I think I said that right) between them. Servers are plugged into both Nortel's and have either switch assisted load balancing or NFT. There...
4
4
 
ACD Calls
We have a Meridian Option 11 C mini. I have agents logged into the queue but when I call the DN, my call goes to the on-hold message. They dont have the MSB activated and I cann call their personal...
2
2
 
Joining two bcm's together to act as one using VOIP.
Hi I require to join 2 BCM 1000's on two sites together so that dialling any extention on site 1 will connect to any extention on site 2. In other words it just appears as one big exchange. The best...
3
3
 
Nortel Modular ICS
Hi All Previously I got this partial reply. However I would like to know if changing from BRA to PRI will default the system. They already have DID's set up (randomly) which the customer wants to keep...
 
BCM installers checklist
I noticed that Nortel has an installers checklist for things like the CCM and CallPilot which list out all the steps needed to install those products. Has anyone seen a good checklist for the BCM when...
 
D-channel requirement for TDMI on Option 11C
We are going to add a PRI between the Option 11c and another pbx. We have asked for a quote for a TDMI card and D-channel daughterboard. The vendor tells us that since we are at Call Server VERSION...
1
1
 
Alteon 180 Password Reset
Wondering if anyone in this ng knows how to perform a password reset on an old Alteon 180 switch? TIA! Matt
2
2
 
Default 470 switch web access user name ??
Hello all, I recently changed the read only and read / write pasword for the web interface on the 470 stack that I have, now I can not log in. It prompts me for a username and passwor4d. I don't know...
2
2
 
Nortel CS1000M (OTM) - PBX Info
Nortel CS1000M PBX (OTM) - What LOAD do I print to find the version, as well as port/channel capacity? The person who normally handles this is on vacation (naturally!) and I need the info to complete...
1
1
 
Contivity: Post login behavior
Hi there, Is it possible to force an action post login? If I want a specific web page to come up once users have authenticated and are connected, how would I go about doing that? We are looking for...
 
Nortel BCM 300 - International Dialing Issue
I am using the Nortel BCM 300... and have an issue when dialing International numbers. Business Communications Manager Version 3.7 Build 2.4f As far as we know, we dont have International dialing...
1
1
 
8600 - limit inter-VLAN communication
Hello all, I have two 8600s in terrabit configuration with IST interconnection and several internal VLANs. All VLANS have IPs and VRRP is enabled and by default all those internal VLANs can route to...
1
1