Re: VGA -No display problem
Bookmark this page:
 Yahoo!
 Google
 Windows Live
 del.icio.us
 digg
 Netscape
|
|
||||||||||
|
Posted by Andrew Smallshaw on June 11, 2008, 8:23 am
Please log in for more thread options That suggests a problem with either CPU, memory or graphics cards. I suggest it is more likely the first two that the graphics. Try reseating the memory and ensuring that it is in the correct sockets to see if that helps. > Could it be anything else - cpu or RAM ?
> > Also another question - Can you test m'boards for VGA output with nothing > added - ie no cpu or RAM added ? The CPU and RAM are the two things that are needed before it will begin video output. Have you got the internal speaker connected (the one going to the motherboard, not the sound card). If so you will likely be getting a distinctive pattern of beeps. Look that up in the BIOS guide and that will tell you what the problem is, assuming no defective components that will be either CPU, RAM or video. -- Andrew Smallshaw andrews@sdf.lonestar.org | ||||||||||
| Similar Threads | Posted |
| Re: VGA -No display problem | June 11, 2008, 8:23 am |
| No Display | August 29, 2006, 6:22 am |
| Secondary Display question | January 23, 2006, 5:05 am |
| New build - no display on monitor | February 9, 2008, 11:15 am |
| windows xp wont display on 14" monitor | July 26, 2005, 8:45 am |
| When setting a TV as a Second display device will i get componet as a | June 19, 2005, 3:34 pm |
| Front Panel Display with Video | March 24, 2008, 5:19 am |
| Which monitor should I get for Windows Vista to display HDTV? | October 27, 2006, 4:53 pm |
| Video card has snowy pixels on display | December 8, 2006, 12:32 pm |
| Optimum Display Resolution (to CRT Television over S-Video) | December 1, 2007, 2:26 pm |
| USB Problem | June 4, 2005, 6:34 pm |
| USB 2.0 problem | February 9, 2006, 7:07 am |
| Ram Problem | July 21, 2006, 6:02 am |
| RAM problem? | July 7, 2008, 2:45 pm |
| Serious corruption problem | February 6, 2005, 1:46 pm |
> Turn it on and it all seems to power up ok - cpu fan spinning, hard drive
> powering up, green diode light showing on m'board etc
>
> But not getting any output from VGA socket