Re: Control occupancy sensor/motion sensor using Powerlinc V2 controller
Bookmark this page:
 Yahoo!
 Google
 Windows Live
 del.icio.us
 digg
 Netscape
|
|
||||||||||
|
Posted by Dave Houston on July 19, 2007, 7:03 am
Please log in for more thread options I do not understand what you mean by "control". All of the RF motion sensors are one-way only. When they sense motion, they send an RF code to the transceiver which then sends a PLC code on the powerline. There is no path for sending messages to the motion sensors nor do the motion sensors have any circuitry for receiving messages. The motion sensors are "programmed" using their pushbuttons. All the Powerlinc controller can do is react to the PLC codes on the powerline. | ||||||||||
>I want to control occupancy sensor [PMS02] and motion sensor [MS14A]
>using powerlinc V2 controller USB [2414U]. There is also an RF
>transceiver present in the circuit. Manually i be able to control the
>x10 PRO modules using the motion sensor/transceiver combination. The
>lamp module is LM465.
>I want to control the motion sensor/occupancy sensor using PLC but no
>idea about how it can be done
>Can anyone suggest steps [if possible]
>Thanks
>Arnie