General Home Automation Converting An Existing X10 System To Work With CFLs

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Converting An Existing X10 System To Work With CFLs tgdyar 02-09-08
Posted by on February 9, 2008, 8:30 pm
Please log in for more thread options
Here is a link to a tutorial I put on the [b]X10 Forum[/b]
about[url=http://www.x10community.com/forums/index.php?
topic=14210.0]Converting Existing X10 Systems To Work With CFLs[/url].

I happen to use an X10 CM15A with Active Home Pro (AHP) to control my
modules but the modifications I describe are control system
independant so should work equally well any other systems.

You do not need to register on the X10 Forum to read posts but only to
make your own posts. If there are many replies here, instead of on
the [b]X10 Forum[/b], about this tutorial I'll put a link back here
from there.


Posted by on February 9, 2008, 8:37 pm
Please log in for more thread options
Sorry about the bad link. I haven't posted here in a long time and
did it wrong. Here's the correct link:

http://www.x10community.com/forums/index.php?topic=3D14210.0

On Feb 9, 8:30=A0pm, tgd...@sbcglobal.net wrote:
> Here is a link to a tutorial I put on the [b]X10 Forum[/b]
> about[url=3Dhttp://www.x10community.com/forums/index.php?
> topic=3D14210.0]Converting Existing X10 Systems To Work With CFLs[/url].
>
> I happen to use an X10 CM15A with Active Home Pro (AHP) to control my
> modules but the modifications I describe are control system
> independant so should work equally well =A0any other systems.
>
> You do not need to register on the X10 Forum to read posts but only to
> make your own posts. =A0If there are many replies here, instead of on
> the [b]X10 Forum[/b], about this tutorial I'll put a link back here
> from there.


Posted by on February 29, 2008, 11:08 am
Please log in for more thread options
A new section has been added to the thread at the link below. It's
about the aftermath of the conversion and covers a lot of loose ends,
some of them still unresolved. Click on the link below and then on
EPILOGUE. While you're there click on ERRATA to see if anything else
has been updated since your last visit.

On Feb 9, 8:37=A0pm, tgd...@sbcglobal.net wrote:
> Sorry about the bad link. =A0I haven't posted here in a long time and
> did it wrong. =A0Here's the correct link:
>
> http://www.x10community.com/forums/index.php?topic=3D14210.0
>
> On Feb 9, 8:30=A0pm, tgd...@sbcglobal.net wrote:
>
>


Similar ThreadsPosted
Converting An Existing X10 System To Work With CFLs February 9, 2008, 8:30 pm
Help converting x10.com devices in the UK June 19, 2006, 6:14 pm
Converting Smarthome twoway appliance module 2001STW May 21, 2005, 3:41 pm
Converting an X-10 RF wallswitch to operate using a standard toggle switch September 24, 2007, 6:26 am
Converting a US 300MHz RMS18/MS12A motion sensor to transmit at 433.92 MHz January 12, 2006, 3:46 pm
Dissecting CFLs June 3, 2007, 9:49 am
CFLs: A brief test July 23, 2007, 10:35 am
Retrofitting existing floodlights November 7, 2005, 12:59 pm
CFLs flicker when Wall Swtich WS467 is OFF March 5, 2008, 3:43 pm
Add New Insteon or X10 Switches to existing X10 installation? December 6, 2005, 8:41 pm
Cell phone use with existing home wiring June 24, 2005, 6:05 am
Preperations for home automation with existing equipment thru network adjustment questions February 26, 2005, 1:13 pm
Would This Work? March 26, 2006, 12:37 pm
How does Insteon work? June 4, 2007, 9:44 pm
For 1-2 days work, some serious HA progress July 31, 2006, 12:38 am