Latest threads in General Home Automationshow only best voted threads

Subject Author Posted Replies
 
TW523 no longer transmitting. Repairable? Any compatibility with CM11A?
I have a homebrew home control system that interfaces with a TW523 to the powerline for signals. Commands are sent to it using X10 controllers and it sends commands to devices (but not anymore). I...
5
5
 
Wulian IOT Home Automation Products&Software Service&Distribution
Wulian IOT can not only provide all kinds of home automation products, but also can provide software services. As one of ZigBee Alliance participant members, Wulian IOT is fast becoming the leader in...
 
Question about SmartHome 1132CU programming
I have and use a SH 1132CU with the "plus" software. Basically, my house is on house code B, however, some stuff is on C. I have front floods on C10 and rear floods on C9. In the 1132 programming I...
2
2
 
Need replacement for model CP290 X10 home automation system standalone controller
Seeking suggestions for a cost effective replacememant for a dead CP290 home automation controller The CP290 X10 home automation system controller is a STANDALONE device. It is programmed using a PC o...
13
13
 
best Automation& PLC Training in Coimbatore
 
How to make a multi switch
I am not a home automation expert, so please forgive my nativity. I have two devices (device A and device B). I would like to have a 'switch' to control both devices. I would like to be able to push a...
1
1
 
X10 control via Internet?
Are there any X10 devices on the market that would allow remote control of X10 adapters through Internet that only requires the target adapters to be connected to some network router interface but not...
2
2
 
Any IP cams out there with most functionality in its firmware?
Have a look at Foscam. It cost around $70 bucks, has motion detection, pan-and-tilt and does not require a computer. It can e-mail pictures when motion is dtected. There are free iPhone and Android...
1
1
 
lf: BX24-AHT pcb
hi, any of you guys have in their box one or couple of unpopulated pbcs for Dave Houston's All Housecode Transceiver BX24-AHT? I know he has Gerber files on his web site and I can get a board done,...
1
1
 
Forwarding RTSP port to multiple IP Cams
I would like to hear from those of you who operate several IP cameras behind a router's firewall which all require forwarding the same RTSP port 554. How do you configure your router for that so you...
 
Distributor Search
Hello all, Any one in here know of a distributor of X10 and or Insteon that sells at dealers prices?? Basically I want to avoid buying at retail when I am going to re-sell to a customer. This may be a...
 
Looking for good phase coupler for X10
My X10 and Homeplug 200 AV powerline components don't work well across the two phahases of wiring and I am looking for a solution to it. I wonder if anybody could recommend some good phase...
3
3
 
Strange X10 Lamp module problem
Here a new one on me. I have used X10 in my house since it came out and have never seen this. I have 2 lamp modules plugged into the same outlet strip. One is a stock lamp module, the other is a lamp...
11
11
 
Any home sec IP cams for Android phones?
Has any of you found yet a good IP camera for home security which can be viewed and controlled remotely with an Android smartphone? Unfortunately my old Linksys WVC54G cam can only be used with MS IE.
11
11
 
ELK m1 in Europe
Hi All, Does any one know if the ELK M1 will work in europe, besides the obvious power supply question? I'm considering buying one (board only) an get the rest of stuff locally. Regards
1
1