Latest threads in General Home Automationshow only best voted threads

Subject Author Posted Replies
 
X10 Commander
I purchased the X10 commander app got it connected,I 'm able to turn on and off, dim and brighten modules, but my problem is that I have input names a nd addresses for the modules on Commander on my...
 
The importance of latency in smart home automation
Rob Dream Green House - Stylish and environmental friendly products, services and technologies for designing & building your own home. Dream Green House - Stylish and environmental friendly products,...
 
Why I won't be buying a Nest Protect
My views on this device and how it fits with my existing home automation system: Rob Dream Green House - Stylish and environmental friendly products, services and technologies for designing & building...
3
3
 
RE: FS: Ademco 685 Receiver
Hello Jim! How nuch does it cost a 685-8 line card? Regards, Juan Carlos Lozano
 
Schaltbares Glas und Elektrochromes Glas kaufen für klein & Großhandel
http://schaltbares-glas.de/schaltbaresglas_ueberuns.htm
 
LED bulbs and X-10 modules
It has been years since I posted on c.h.a. I did a search for 'LED' on Goo gle newsgroups for this group and found no recent articles. This surprised me as I thought someone would have tried LED bulbs...
 
How do I do away with a low voltage switch that controls outlets?
I have several outlets that are controlled by various low voltage switches in my home. I want to make the outlets work all the time and NOT controlled by a switch. How do I do this?
1
1
 
SkyLinkHome
Anybody know how this works? The specs are well hidden. They make a motion detector for Insteon but compatibility or technique are well hidden. Any info would be appreciated. Thanks
 
Thinking Home
I have been using Thinking Home (Mac) software (Ver 1.17) for many years (RCA home controller). It serves my purpose. Every thing has been working fine till DST ended. My set time modules are coming...
 
Smart Home presence
Project to enable occupancy and presence detection in our smart home: Rob Dream Green House - Stylish and environmental friendly products, services and technologies for designing & building your own...
 
PCIMINI and Quickloader I can't get them to locate my P801 any ideas
I have Quickloader on an XP desktop with the PCImini connected to Com 1 the computer says the Com is working correctly but I can't communicate with the P801. I have tried to write the program then...
 
Cannot program Channel Plus Model 3025 channel B, how do I reset the unit?
I have successfully programed the 3025's channel A but cannot get the unit to accept the input for channel B. Is there a way to reset the unit?
 
Leopard (1) and SECU-16 for sale
My stuff is for sale! Working fine as in pics! Mention forum if wish to negotiate... If inappropriate, tell me where you moved it! http://richmond.craigslist.org/ele/3874247841.html
 
Which security wire to use?
While renovating my kitchen I want to run inside the walls the wires for some security detectors. I understand I need 22 gauge 4 wire for the rate-of-rise and carbon monoxide detectors. But looking...
3
3
 
GFCI Bypass
I have a new treadmill. When I increase speed the GFCI receptacle trips, turning off power to the treadmill. Is there a safe way to bypass or install an outlet that can handle the increased speed on...