4 speakers to 1 volume control

I have volume controls that are imdepence matched. Can I run 4 speakers off one control, since the room is rather large? I would not be going outside the max number of speakers per the volume control (can

work with up to 8 pairs). If not, is there another way without putting

2 volume controls in the same room? Thanks.
Reply to
bt
Loading thread data ...

Set the impedance matching jumper on the V/C with two pairs of parallel speakers to 8X. Set the other two V/C units to 4X.

Reply to
Robert L Bass

Thanks for the reply. This brand is actually auto-imdepence. There are not jumper switches on the the volume control. Issues?

Reply to
bt

You're welcome.

Probably not. Your overall impedance will either be ok (if they function well) or a little low but not critically so. I'd bench test the setup first at low volume levels and slowly ramp up to see how it's going to perform. In all probability you'll be ok.

Reply to
Robert L Bass

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.