Bootup stops at Updating ESCD. Building DMI Pool.
Bookmark this page:
 Yahoo!
 Google
 Windows Live
 del.icio.us
 digg
 Netscape
|
|
|||||||||||||
|
Posted by k on February 1, 2007, 2:26 am
Please log in for more thread options My computer bootup stops at "Updating ESCD ... Building DMI Pool ." in 7 seconds after turning on. How to make my computer bootup? My mainboard is Chaintech 6btm. Reseting BIOS to default settings did not help. Best regards, Dima +79035093892 | |||||||||||||
|
Posted by Rod Speed on February 1, 2007, 3:48 am
Please log in for more thread options Thats not that unusual, basically its the last text that is put on the screen before the drivers etc are loaded, so if there is a problem with that, that is what you see on the screen. > How to make my computer bootup?
Try a logged boot, from the F8 menu, that should show how far its getting and what it stops booting at. > My mainboard is Chaintech 6btm.
> Reseting BIOS to default settings did not help. If there isnt anything useful that comes out of the logged boot, see what happens if you unplug any non essential cards. If that still stalls, check for bad caps on the motherboard. | |||||||||||||
|
Posted by k on February 2, 2007, 4:28 am
Please log in for more thread options >
> > My computer bootup stops at
> > "Updating ESCD ... > > Building DMI Pool ." > > in 7 seconds after turning on. >
> Thats not that unusual, basically its the last text that is put > on the screen before the drivers etc are loaded, so if there > is a problem with that, that is what you see on the screen. > > > How to make my computer bootup?
>
> Try a logged boot, from the F8 menu, that should > show how far its getting and what it stops booting at. > > > My mainboard is Chaintech 6btm.
> > Reseting BIOS to default settings did not help. >
> If there isnt anything useful that comes out of the logged boot, > see what happens if you unplug any non essential cards. > > If that still stalls, check for bad caps on the motherboard. Thanks Rod for your suggestions! The F8 does not appear on the screen to call the F8 menu. Do you mean jumpers or cards by the caps on the motherboard? Best regards, Dima | |||||||||||||
|
Posted by Rod Speed on February 2, 2007, 2:11 pm
Please log in for more thread options >>
>>> My computer bootup stops at
>>> "Updating ESCD ... >>> Building DMI Pool ." >>> in 7 seconds after turning on. >>
>> Thats not that unusual, basically its the last text that is put >> on the screen before the drivers etc are loaded, so if there >> is a problem with that, that is what you see on the screen. >> >>> How to make my computer bootup?
>>
>> Try a logged boot, from the F8 menu, that should >> show how far its getting and what it stops booting at. >> >>> My mainboard is Chaintech 6btm.
>>> Reseting BIOS to default settings did not help. >>
>> If there isnt anything useful that comes out of the logged boot, >> see what happens if you unplug any non essential cards. >> >> If that still stalls, check for bad caps on the motherboard. > Thanks Rod for your suggestions!
> The F8 does not appear on the screen to call the F8 menu. It doesnt need to to work, and the timing of hitting it can be a bit tricky, so if it doesnt work the first time, try another boot. > Do you mean jumpers or cards by the caps on the motherboard?
No, caps is an abbreviation of capacitors. These are the usually blue or black plastic covered post like things that stick up vertically from the motherboard surface. The tops should be flat. If any have bulged or have leaked, thats a bad cap and can be the problem. | |||||||||||||
|
Posted by k on February 4, 2007, 1:33 pm
Please log in for more thread options >
> >>> My computer bootup stops at
> >>> "Updating ESCD ... > >>> Building DMI Pool ." > >>> in 7 seconds after turning on. >
> >> Thats not that unusual, basically its the last text that is put
> >> on the screen before the drivers etc are loaded, so if there > >> is a problem with that, that is what you see on the screen. >
> >>> How to make my computer bootup?
>
> >> Try a logged boot, from the F8 menu, that should
> >> show how far its getting and what it stops booting at. >
> >>> My mainboard is Chaintech 6btm.
> >>> Reseting BIOS to default settings did not help. >
> >> If there isnt anything useful that comes out of the logged boot,
> >> see what happens if you unplug any non essential cards. >
> >> If that still stalls, check for bad caps on the motherboard.
> > Thanks Rod for your suggestions!
> > The F8 does not appear on the screen to call the F8 menu. >
> It doesnt need to to work, and the timing of hitting it can be > a bit tricky, so if it doesnt work the first time, try another boot. > > > Do you mean jumpers or cards by the caps on the motherboard?
>
text -
> No, caps is an abbreviation of capacitors. These are the usually > blue or black plastic covered post like things that stick up vertically > from the motherboard surface. The tops should be flat. If any have > bulged or have leaked, thats a bad cap and can be the problem.- Hide quoted >
> - Show quoted text - Thanks Rod for your explanation! Clearing the CMOS by a jumper raplacement helped! Best regards, Dima | |||||||||||||
| Similar Threads | Posted |
| Bootup stops at Updating ESCD. Building DMI Pool. | February 1, 2007, 2:26 am |
| Updating ESCD.... and then it stops | November 22, 2006, 4:14 pm |
| "Updating ESCD...success" on bootup: any ideas? | June 19, 2006, 6:52 pm |
| Updating ESCD - stays like that forever - CPU problems? | September 12, 2005, 9:42 pm |
| On bootup, get "SDRAM Dimm 1" and then computer stops | January 3, 2006, 6:10 pm |
| What does "Verifying DMI pool data" mean? | October 15, 2005, 8:23 pm |
| Need Help Correcting Pool of Printer Names | October 18, 2006, 5:46 pm |
| XP hangs at bootup | April 7, 2006, 12:44 pm |
| Can't Bootup with Two Raids | September 19, 2006, 11:07 pm |
| updating bios | May 24, 2006, 7:34 am |
| HDD's not recognised at bootup! TIA. | September 20, 2006, 12:22 am |
| Noisy Hard Drive on Bootup using XP | March 26, 2007, 6:05 am |
| problem with flash updating for samsung dvd r-120 | July 22, 2005, 2:59 pm |
| Updating CPU on Compaq Armada E500 | May 20, 2007, 1:37 pm |
| Bootup problem - connecting IDE cable causes fault | October 2, 2006, 3:44 pm |
> "Updating ESCD ...
> Building DMI Pool ."
> in 7 seconds after turning on.