Packet Engines PowerRail 1000
Bookmark this page:
 Yahoo!
 Google
 Windows Live
 del.icio.us
 digg
 Netscape
|
|
||||||||||||||||
|
Posted by Angler on April 26, 2005, 8:06 pm
Please log in for more thread options A blast from the past to be sure... Does anyone know what the default login ID and password is for these switches? I have aquired one and have console access... ************************************************************ Packet Engines PowerRail 1000 Version 2.0.0r22 - 2 Feb, 1999 Copyright(c) 1997-1998 Packet Engines, Inc. Spokane, Washington, USA All rights reserved. System MAC Address: 00:xx:xx:xx:xx:xx ************************************************************ Current Time: Apr 25, 2005 14:02 Was able to boot with no config by powering up and typing any key... # Date Time Vers Size Name 1 2003-02-07 09:03:27 2.0.0r22 3027 startup.config Select a configuration file by number, or enter "0" for none, or ESC to return to the previous menu: 0 Enter one of the following options: 'C' to select the EMM configuration file [*none*] 'D' to start Xmodem download [-] 'I' to select an EMM image to run [PR1000.sys] 'S' to set option for the serial BAUD rate [9600] 'ESC' to continue startup Your choice: [Selected config file is "*none*"] [Invoking EMM image "PR1000.sys" from Onboard flash] gEMM_SEEPROM.flash_size = 0x0080 [EMM image started (boot: is Onboard flash)] [EMM MAC address: 00-xx-xx-xx-xx-xx] Thanks in advance... Angler | ||||||||||||||||
|
Posted by Brian W. Antoine on April 26, 2005, 6:49 pm
Please log in for more thread options On Tue, 26 Apr 2005 17:06:02 -0400, Angler <anglerpdIZZATyahoo.com> wrote:
>A blast from the past to be sure...
> >Does anyone know what the default login ID and password is for these >switches? I have aquired one and have console access... > >************************************************************ > > Packet Engines PowerRail 1000 > > Version 2.0.0r22 - 2 Feb, 1999 > > Copyright(c) 1997-1998 Packet Engines, Inc. > Spokane, Washington, USA > All rights reserved. > System MAC Address: 00:xx:xx:xx:xx:xx > >************************************************************ As best I recall, it was "admin" and a blank password. | ||||||||||||||||
|
Posted by Angler on April 29, 2005, 1:17 am
Please log in for more thread options
Yep, that was it. Thanks. Brian W. Antoine wrote: > On Tue, 26 Apr 2005 17:06:02 -0400, Angler <anglerpdIZZATyahoo.com> wrote:
> > >>A blast from the past to be sure...
>> >>Does anyone know what the default login ID and password is for these >>switches? I have aquired one and have console access... >> >>************************************************************ >> >> Packet Engines PowerRail 1000 >> >> Version 2.0.0r22 - 2 Feb, 1999 >> >> Copyright(c) 1997-1998 Packet Engines, Inc. >> Spokane, Washington, USA >> All rights reserved. >> System MAC Address: 00:xx:xx:xx:xx:xx >> >>************************************************************ >
> > As best I recall, it was "admin" and a blank password. | ||||||||||||||||
| Similar Threads | Posted |
| Packet Engines PowerRail 1000 | April 26, 2005, 8:06 pm |
| 1000 Base T | September 23, 2004, 9:16 am |
| Auto nego on 1000-X | September 4, 2004, 9:29 am |
| Advice on cheap corp 10/100/1000 switch please | June 9, 2007, 6:51 pm |
| Versions of the Intel Pro/1000 MT Quad Port Card | February 22, 2007, 2:59 am |
| I have 10/100/1000 Mbps ports one side and two switches connected to each port, one is 10Mbps and other one is 100Mbps does auto-negotians will automatic?. | February 6, 2005, 10:08 pm |
| XGMII end of packet | July 20, 2004, 4:19 am |
| Generate packet with bad CRC | June 21, 2007, 9:15 am |
| Packet recorder | August 8, 2007, 11:36 am |
| Packet capture | November 28, 2007, 12:07 am |
| Creating a test packet | October 13, 2005, 11:21 am |
| ethernet packet preamble | May 4, 2006, 2:01 pm |
| determination of length of packet............ | October 18, 2006, 1:41 am |
| Source MAC address per IP packet | June 15, 2008, 3:02 pm |
| Packet Coming From Router Disappears | June 24, 2006, 2:45 am |