Latest threads in Ethernet LANshow only best voted threads

Subject Author Posted Replies
 
VGA over CAT5e
Hi Guys, I need to get a VGA signal from the Nav Station in my boat to the monitor in the bridge. I could just run a VGA cable (about 4m worth) but I need to pass the cable through some small holes...
22
22
 
Ethernet Performance Testing and throughput
Hi, can someone please give some background on ethernet performance testing and throughput measurement applications like netperf, ttcp and if there are any limitations/disadvantages associated with...
7
7
 
mac and proto vlan classifiers
hi, can protocol classifier and mac classifier be applied on trunk ports ? thanks
 
Hackable GbE Controller?
Hello, I was just wondering if there are any GbE controllers out there that do enough of their processing in the driver (or have sufficient control knobs available) that we can experiment with...
5
5
 
FDDI to Fast Ethernet "Bridge" Available?
(Originally posted in Hi there. I currently have a Synoptics FDDI workgroup concentrator, and I use a server as a FDDI-to-Ethernet router to connect to the Fast Ethernet switch and to my Wi-Fi access...
18
18
 
mac vlan
if a mac classification is done for a mac address. The host with that mac address cannot be part of anyother vlans? p1 m1{v1,v2} p2 p3,v1 p4,v1 a ---------------------------- b...
1
1
 
should request to 192.168.x.x get out of my router to the WAN?
If I type http://192.168.1.1 in my browser and the LAN has no such host, should the router forward this request out to the WAN? My home network: DSL--> dlink router --> zyxel wireless router I thought...
9
9
 
Problem with PAUSE frames ethernet flow control
I am working with PAUSE frames and I have some problems : I'm working in a Project with Pause Frames and I have a problem .My really problem is that I send PAUSE frames with a FPGA to the PC and I´m...
3
3
 
VNSwitch 900CG Installation and Configuration Manual? (DECHub/MultiSwitch 900)
Hi there. I am trying to locate a DEC/Compaq/Cabletron VNSwitch 900CG Fast Ethernet/Gigabit Module Installation and Configuration Manual. This module is for the DECHub/MultiSwitch 900 with firmware...
 
10BaseT links with 100BaseT
I have an issue where a 10 Mbps system (non auto-negotiation) links with another port on 100 Mbps port which is also non negotiatited/ forced. Is this happening due to aliasing ? The 100 Mbps port...
3
3
 
MSTP MIB
Is there an MSTP MIB? I've looked all over and the best I can find is some mailing list activity in 2005 that says one is needed but nothing current or seemingly approved.
1
1
 
prio-tagged frames *towards* a station?
Folks, maybe someone can share insight with me as 802.1Q left me not much wiser... I *do* understand (I think) about *sending* priority-tagged into a network. I am, however, puzzled what frames shall...
6
6
 
How to test network in windows?
What tools should I use and where to get them?
1
1
 
Internet works but computers don't see each other - "MSHOME is not available..."
Hi, I have a problem with Sharing documents, and printers in a LAN (all comps Win XP home) network I am responsible for. It is a nice 32-port 1GBit switch, used by about 5-10 (sometimes more)...
1
1
 
vlan and interface
i've read an understood basics of vlan; I've a very basic doubt on this. can i view vlan as a logical interface, because i've seen some switches which provide vlan as an interface, meaning there is a...
3
3