1000BaseSX and Single Mode Fibre
Bookmark this page:
 Yahoo!
 Google
 Windows Live
 del.icio.us
 digg
 Netscape
|
|
||||||||||||||||
|
Posted by Steve Wright on April 8, 2005, 12:15 pm
Please log in for more thread options Hi all, I'm hoping someone can advise, as I am unsure. I have a short run of single mode fibre (~90 meters) between a couple of buildings and have some switches that have 1000BaseSX SFP adapters in them. Am I correct in believing that with 1000BaseSX it has to be multimode fiber? What are the chances of this working with the single mode fiber as it is quite a short run? Thanks for any help! Steve | ||||||||||||||||
|
Posted by Daniel J McDonald on April 8, 2005, 4:11 pm
Please log in for more thread options Yes. >What are the chances of this working with the single mode fiber
>as it is quite a short run? Slim to none. 10 meters might make it. LX gbics are pretty cheap - they are under $100 if you look hard enough. Go buy a pair off e-bay and slap them in your device. -- Daniel J McDonald CCIE # 2495, CNX Visit my website: http://www.austinnetworkdesign.com | ||||||||||||||||
| Similar Threads | Posted |
| 1000BaseSX and Single Mode Fibre | April 8, 2005, 12:15 pm |
| 1000BaseSX to 100BaseFX | December 3, 2004, 6:35 pm |
| Does DD-WRT include a Client Mode? | May 3, 2005, 8:44 pm |
| Promiscuous mode ether on WinXP | December 10, 2005, 8:47 pm |
| Fiber card in promiscuous mode under linux | June 13, 2007, 5:26 am |
| Promiscuous Mode on Sun BGE Network Driver Drops VLAN-tagged Packets | April 20, 2005, 2:02 pm |
| Can you connect two gigabit fibre NICs together? | August 6, 2006, 6:57 am |
| which 1gb/s and 10gb/s fibre Ethernet cards? | March 4, 2007, 12:50 pm |
| Ethernet over single UTP | April 19, 2005, 4:32 pm |
| Fibre Channel over Gigabit WAN Ethernet without FCIP possible? | June 29, 2007, 7:33 am |
| Multiple VLANs on Single NIC | January 19, 2006, 8:06 am |
| Multiple PHYs to a single MAC | April 11, 2007, 10:30 am |
| multiple DSL lines for single infrastructure | March 17, 2005, 12:19 am |
| multiple vlans at a single port | June 23, 2008, 1:13 am |
| Cost for Gigabit Ethernet or 2 Gbit Fibre Channel Circuits | April 27, 2006, 3:52 am |
>of buildings and have some switches that have 1000BaseSX SFP adapters
>in them.
>
>Am I correct in believing that with 1000BaseSX it has to be multimode
>fiber?