Hobby Electronics Basics Jam Police Radar with Cold Plasma

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Jam Police Radar with Cold Plasma The Flavored Coffee Guy 04-24-08
Posted by The Flavored Coffee Guy on April 24, 2008, 5:09 am
Please log in for more thread options
Did you know an effective electrostatic generator can produce plasma?
Well, if you get one of these electrostatic dusters, and place it
inside a 3 inch diameter PVC pipe you can generate quite the static
charge by allowing the air to flow through it as you drive. The PVC
should be 12 inches longer than the duster's fibers.

http://www.ettorecleaning.com/product-1385-Poly-(Static)-Duster.aspx

At that fine point, all you need is some aluminum foil and glue that
to the outside of the PVC pipe and strap it to the roof of your car or
truck. It may take 4 or 5 of these before your car will glow in the
dark or actually produce a plasma dense enough to absorb Police
Radar. In theory, it should work.

If not the alternative is a 300KV voltage muliplier and venting the
charge into the air as you drive. A much more complicated circuit.

Similar ThreadsPosted
Jam Police Radar with Cold Plasma April 24, 2008, 5:09 am
Jam Police Radar with Cold Plasma April 24, 2008, 5:09 am
Cold Plasma Speakers August 13, 2006, 5:17 pm
Police Lightbar Project June 29, 2005, 5:10 pm
Mobile Phone Hack(receive police transmissions) July 26, 2007, 8:33 am
Plasma or LCD? February 7, 2005, 1:28 pm
NEC Plasma P S rebuild December 28, 2005, 11:07 am
Question about off the self "Plasma Globes" September 10, 2004, 3:37 am
Putting in a ground for a plasma cutting table November 30, 2006, 6:02 pm
Digital cameras and the cold November 29, 2004, 4:40 pm
Re: My Dream PC -- Silent, Cold, and Motionless March 24, 2007, 2:12 am
Best deals in electronics, computers, laptops, plasma and lcd televisions, cameras and camcorders April 17, 2007, 7:37 pm
Cold Fusion Reactor needs Power Supply Help ! November 26, 2005, 7:38 pm
No cold water in my HOTPOINT washing machine !!! June 21, 2006, 6:47 am
Question on sizing inverter for cold-cathode fluorescent August 29, 2006, 1:26 pm