Hobby Electronics Basics Interfacing cheap R/C board - SUCCESS!

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Interfacing cheap R/C board - SUCCESS! Don Bruder 05-23-06
Posted by Don Bruder on May 23, 2006, 8:14 pm
Please log in for more thread options



finally managed to get a couple wires stuck to the pins of the decoder
chip so I can tap it directly, and even managed to do it without cooking
anything off with the iron in the process! YAY!

Project is nearing completion - I've got perfect operation.

Now I need to figure out a way to house it that's reasonably
weather-tight (it's intended to be an "outdoors" thing), but doesn't
involve spending any money. So far, the only cost has been time - all
materials have come out of "The Pile". I'd *REALLY* like to keep it that
way if I can figure out a way to make it happen.

<eyes an old tupperware container with no lid...>

--
Don Bruder - dakidd@sonic.net - If your "From:" address isn't on my whitelist,
or the subject of the message doesn't contain the exact text "PopperAndShadow"
somewhere, any message sent to this address will go in the garbage without my
ever knowing it arrived. Sorry... <http://www.sonic.net/~dakidd> for more info

Posted by Rich Grise on May 24, 2006, 4:02 pm
Please log in for more thread options


On Tue, 23 May 2006 17:14:53 -0700, Don Bruder wrote:

> finally managed to get a couple wires stuck to the pins of the decoder
> chip so I can tap it directly, and even managed to do it without cooking
> anything off with the iron in the process! YAY!
>
> Project is nearing completion - I've got perfect operation.
>
> Now I need to figure out a way to house it that's reasonably
> weather-tight (it's intended to be an "outdoors" thing), but doesn't
> involve spending any money. So far, the only cost has been time - all
> materials have come out of "The Pile". I'd *REALLY* like to keep it that
> way if I can figure out a way to make it happen.
>
> <eyes an old tupperware container with no lid...>

Get one out of the kitchen, and when your wife asks about it, say "It
must have got knocked off the dishwasher rack and up against the heating
element. Got a big hole burned in it, so I just tossed it. <wink, wink,
nudge, nudge>". ;-)

Good Luck!
Rich


Similar ThreadsPosted
Interfacing cheap R/C board - SUCCESS! May 23, 2006, 8:14 pm
Interfacing a cheap R/C Car controller... May 22, 2006, 12:44 am
MUST Know this for your Dating Success! June 8, 2008, 3:21 pm
interfacing with pci April 7, 2007, 6:59 am
Interfacing to a thermocouple December 28, 2005, 4:32 pm
Interfacing a synchronous counter - need ur help. July 26, 2005, 6:23 am
Keyboard and Video interfacing March 18, 2006, 5:09 pm
Interfacing A Pressure Sensor September 12, 2006, 3:54 pm
Parallel port Interfacing June 15, 2008, 10:46 am
Separation of RF board and microcontroller board caused problems September 1, 2004, 6:37 am
Interfacing FM receiver to PC thro'USB port May 4, 2007, 5:19 pm
free microcontroller basics and interfacing examples February 22, 2006, 5:42 am
[Question] Is there any one using Keithley 2400 source meter and interfacing it with linux January 4, 2005, 8:58 am
Nike Jordan Shoes: Cheap Nike,Cheap Jordan,clothing ,coat,mobile phones Cheap Nike Dunks,Air Force one nike shox more in www.shopbb.com October 23, 2007, 11:45 am
cheap BAPE jeans wholesale cheap ARMANI jeans wholesale www.honest-shop.cn October 6, 2008, 11:04 pm