Hi,
We have two locations connected with a 4 T1 IMA point-to-point config. Each location also has it's own internet T1. One of the buildings has a web server on it's firewall's dmz. We would like to access that server from the other site over the point-to-point connection, rather than the internet T1, but I'm not sure how to route that. When I try to route the web servers address with something like "ip route x.x.x.x
255.255.255.255 ATM1/IMA0.1" a traceroute shows it stopping at 10.1.1.2. I would appreciate any help I can get on setting this up. Here's some of each router's config:Site #1 with web server (public ip x.x.x.x on dmz)
interface Ethernet0/0 ip address 172.16.1.1 255.255.255.0 half-duplex ! interface ATM1/IMA0 no ip address no atm ilmi-keepalive ! interface ATM1/IMA0.1 point-to-point ip address 10.1.1.2 255.255.255.252 pvc 10/101 encapsulation aal5snap ! ! router eigrp 20 network 172.16.1.0 network 192.168.1.0 auto-summary ! ip classless ip route 0.0.0.0 0.0.0.0 172.16.1.254 255.255.255.0 ----> (LAN port of firewall with server on DMZ) ip route 192.168.1.0 255.255.255.0 ATM1/IMA0.1
Site #2
interface Ethernet0/0 ip address 192.168.1.1 255.255.255.0 half-duplex ! interface ATM1/IMA0 no ip address no atm ilmi-keepalive ! interface ATM1/IMA0.1 point-to-point ip address 10.1.1.1 255.255.255.252 pvc 10/101 encapsulation aal5snap ! ! router eigrp 20 network 172.16.1.0 network 192.168.1.0 auto-summary ! ip classless ip route 0.0.0.0 0.0.0.0 192.168.1.254 255.255.255.0 ----> (LAN port of firewall) ip route 172.16.251.0 255.255.255.0 ATM1/IMA0.1
Thanks