we have private IP address on WAN port, no connection through Router?
|
Bookmark this page:
 Yahoo!
 Google
 Windows Live
 del.icio.us
 digg
 Netscape
|
|
|||||||||||||
|
Posted by GS on October 6, 2005, 7:12 am
Please log in for more thread options
connected through Router, the WAM IP address is: 192.168.25.234 and LAN side it is using 192.168.1 subnet (192.168.1.2 and 192.168.1.3), once enter all WAN port details, th esetup wizard not finishing, and we are not getting internet through Router. If we connect the cable directly to PC and configure that WAN IP address (192.168.25.234), it works, but one PC at a time, I tried both PC's, it works individually, if we connect through Router, nope. Any suggestions, thanks in advance. | |||||||||||||
|
Posted by Tom Stiller on October 6, 2005, 8:09 am
Please log in for more thread options  connected to a NAT router. Normally, additional IP addresses would be available from such a router and one would attach a switch or, less preferably, a hub to such a line to distribute additional IP addresses assigned by it. Who supplies this "leased line" and what are their terms and conditions regarding multiple computers connected to it? -- Tom Stiller PGP fingerprint = 5108 DDB2 9761 EDE5 E7E3 7BDA 71ED 6496 99C0 C7CF | |||||||||||||
|
Posted by riggor99999 on October 6, 2005, 9:52 am
Please log in for more thread options I agree - you may have to put the router in router mode versus gateway mode | |||||||||||||
|
Posted by GS on October 6, 2005, 12:04 pm
Please log in for more thread options This is ISP giving service to home, they come home and hardcode thisstatic IP address into PC (192.168.25.234), instaed of hardcode into PC, we asked them to configure Router WAN port, so that we can connect two PC's to Internet, both PC's connected to Router LAN ports, this is available in Asia, they won't give public IP addres to home, instaed they run RJ45 cable to home and hardcode this private IP address to PC, if we want both PC's, then they are suggesting us to take 2 cables for both PC's. I bought this router and connected, will it work in private IP address case?. | |||||||||||||
|
Posted by Tom Stiller on October 6, 2005, 1:55 pm
Please log in for more thread options No. -- Tom Stiller PGP fingerprint = 5108 DDB2 9761 EDE5 E7E3 7BDA 71ED 6496 99C0 C7CF | |||||||||||||
|
Home Cabling Guide
Finally, an instantly downloadable book that saves you thousands in home improvement dollars! Enjoy living in 21st century technology-advanced home while increasing its selling value and competitive advantage on the real estate market. Whether your cabling is for home office or high-tech leisure, you can wire your home yourself or learn "wirish" to speak with your cabling contractors in their language! Click Here to learn more |
> connected through Router, the WAM IP address is: 192.168.25.234 and LAN
> side it is using 192.168.1 subnet (192.168.1.2 and 192.168.1.3), once
> enter all WAN port details, th esetup wizard not finishing, and we are
> not getting internet through Router. If we connect the cable directly
> to PC and configure that WAN IP address (192.168.25.234), it works, but
> one PC at a time, I tried both PC's, it works individually, if we
> connect through Router, nope. Any suggestions, thanks in advance.