1. Home
  2. Cisco Systems
  3. snmp-server ifindex persist / Modules not persistent on WS-C650x

snmp-server ifindex persist / Modules not persistent on WS-C650x

Dear NG,

i got a WS-C6506 on witch we got the following configured:

snmp-server ifindex persist

now after a system reload, for some reasons the OIDs for the modules change, the interfaces themselves are ok...

---------------------------------------------------------------------------------

sh (s72033_rp-IPSERVICESK9_WAN-VM), Version 12.2(18)SXF8, RELEASE SOFTWARE (fc2)

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ ----------- 1 24 CEF720 24 port 1000mb SFP WS-X6724-SFP SAL 4 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-TX SAL 5 2 Supervisor Engine 720 (Active) WS-SUP720-3B SAL

---------------------------------------------------------------------------------

enterprises.9.3.6.11.1.3.5 48-port 10/100/1000 RJ45 EtherModule enterprises.9.3.6.11.1.3.6 Supervisor Engine 720 enterprises.9.3.6.11.1.3.7 Policy Feature Card 3 enterprises.9.3.6.11.1.3.8 MSFC3 Daughterboard enterprises.9.3.6.11.1.3.9 CEF720 24 port 1000mb SFP enterprises.9.3.6.11.1.3.10 Centralized Forwarding Card

Last digit of OID suddently changes on reload!

what can i do more than: "snmp-server ifindex persist"

Reply to
colin
Loading thread data ...

On Tue, 29 Jun 2010 07:43:33 +0200, colin wrote: .....

This command is intended for ifTable and ifXTable and their extensions. In most(many) mibs you should expect index is NOT persistent.

/hjj

Reply to
Hans Jørgen

well this seems to be a pain with tools like MRTG or similar, if you have to reconfigure all over an over again each time you reload the catalyst 650x...

any suggenstions on how to solve this issues are welcome!

Reply to
colin

No that just means you need to read the MRTG documentation... It was a pain in the first release, but since a very long time you can match your MRTG config lines on other fields of the interface, like name, IP address, description.

Reply to
Rob

well the thing is my client is not using MRTG unfortuanitely... and he's now stuck with that problem. i just used MRTG for discussion reasons. but thank you for the tip!

Reply to
colin

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.