Site to Site VPN

Hello i need some help about configuration CISCO 1812. We have established VPN between main office A and branch office B. And now all the traffic is secured. But I need on side A to establish that clients from B can get only to one server and not all LAN.

Is this possible with Cisco 1812.

Thanks

B
Reply to
boris.kocar
Loading thread data ...

I suppose you must be using some access-list on VPN configuration and you need to only allow te ip/server ip you want to on access-list else drop.

Reply to
CK

Thanks for replay. I tought to that I need to do in ACL list but it doesn't work.

description Tunnel to xy set peer 217.16.87.246 set security-association lifetime seconds 86400 set transform-set ESP-3DES-SHA1 ESP-3DES-SHA match address 108

access-list 108 remark IPSec Rule access-list 108 permit ip 10.0.0.0 0.0.0.255 10.98.0.0 0.0.255.255

Can you write how to drop it. I need only permisson to server with IP

10.0.0.4 B

Reply to
boris.kocar

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.