1. Home
  2. Cisco Systems
  3. Port mirroring in HP 2626-pwr 24 port switch

Port mirroring in HP 2626-pwr 24 port switch

Hi,

any one tell me how to enable port mirroring in HP 2626-pwr 24 port swicth?

I want to enable port mirroring on port 1 and on port 24.

main idea is i want Mirror port 1 -> port 24, all data which will pass through port 1 that mirror will creat on port 24 or port 24 knows what data passing throug port 1..

is that possible or is that a right defination of port mirroring??

Kindly reply me as soon as possible...

Thanks

Ayaz

Reply to
mayazk100
Loading thread data ...

Hello Ayaz,

your understanding of port mirroring is exactly right: you define the source port, port 1 in your case, and you mirror all traffic on that port to the monitoring port, port 24 in your case. The 2626 is menu-driven, check this link for the procedure to enable port mirroring, scroll down to section B-24:

Monitoring and Analyzing Switch Operation

ftp://ftp.hp.com/pub/networking/software/59906023-1004-Mgmt-App_B-Monitor_Analyze.pdf

HTH,

GP

Reply to
nazgulero

Ayaz, If you are at CLI you can type MENU hit 2, then 3

highlight edit, hit enter, that will highlight "MIRROR ENABLED? NO"

change it to yes

then select the ports u want, hit enter, then go to save.

from the cLI it can be done, as well

Reply to
Gallwapa

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.