PIX 515 Remote Access Config Question

Currently we have a PIX 515 connected to a T1. Everythins is working fine. We have decided to implement a remote access solution for our five notebook users. We can successfully connect to the PIX and ping any devices on the PIX LAN network, but we lose the ability to ping websites from the remote PCs. After reading a bit, I discovered we needed to use Split Tunneling so that the remote users can hit both LAN IPs and WAN IPs. However. We cannot get this to work. We have enabled the Split Tunneling feature in PDM, and set it to allow any/any. Still we get nothing.

Any suggestions? We are running PIX 515 OS 6.3(4) and Cisco VPN client 4.7.

Thanks!

-Douglas

Reply to
Douglas
Loading thread data ...

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.