|
Posted by Newsman on March 28, 2006, 4:27 am
Please log in for more thread options
Hi,
i have an 2900 XL LRE and its mode button will not work. So i can´t change
the mode of the LEDs, but thats not the problem.
I must recover the passwort, and for that i need the mode button to
interrupt startup.
Does anybody know if it is an configuration problem or is it a system
failure, e.g. Hardware? The switch works fine, but i do need to change
config.
btw there is no mode assigned and all port LED are always on.
Or is there an other way to recover passwort, the config can be lost;-)
|
| Similar Threads | Posted |
| mode button doesn´t work on 2900 LRE | March 28, 2006, 4:27 am |
| WIC-1T doesnt work on 2621 and 2811 | July 17, 2006, 6:21 am |
| Fail to Convert Aironet 1242 from lightweight mode back to autonomous mode | December 17, 2007, 12:21 am |
| Cisco 6500 - how to change from router mode to hybrid (switch mode) | July 31, 2005, 9:50 pm |
| Can PIM-dense mode and PIM sparse Mode exchange routing related information | December 13, 2007, 4:30 am |
| Newbie: async mode dedicated versus async mode interactive!! | June 8, 2006, 8:09 pm |
| Using switchport mode access vlan x and switchport mode trunk on the same interface | July 27, 2006, 9:43 am |
| Logs button not opening Logs GUI | June 29, 2009, 6:44 am |
| 2900 XL switch | February 8, 2005, 8:47 am |
| 2900 XL-EN vs 3500 XL-EN | June 13, 2007, 3:31 pm |
| catalyst 2900 xl | July 18, 2008, 7:35 am |
| Differences between 2950 adn 2900 | February 8, 2005, 4:05 pm |
| cisco 2900 vlans | May 27, 2006, 3:56 pm |
| The 1900 and 2900 switches | August 29, 2006, 11:49 pm |
| Updating 2900 switch | September 26, 2007, 9:32 pm |