1. Home
  2. Cisco Systems
  3. ip local pool not releasing addresses

ip local pool not releasing addresses

Hi Guys

I currently have a cisco 2811 running ios version c2800nm-advipservicesk9-mz.123-11.T5.bin

We have it configured with ip local pool VPNCLIENTPOOL 10.250.100.1

10.250.100.127 , with radius authentication. We can see authentication going through and users disconnecting with no problems. The issue is that the router is not releasing addresses, clear ip local pool is not supported with this version and the only way we can release ip's is to reload the router.... Any thoughts or ideas on this problems

Cheers Scotty

Reply to
scotty.west
Loading thread data ...

Why not try removing the ip pool configs instead of reloading the router, it might provide some workaround until the problem is found.

Reply to
jefflin.choi

Thanks for the reply Jefflin

That was > Why not try removing the ip pool configs instead of reloading the

Reply to
scotty.west

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.