glbp and ip nat
Bookmark this page:
 Yahoo!
 Google
 Windows Live
 del.icio.us
 digg
 Netscape
|
|
||||||||||
|
Posted by guest on October 19, 2006, 7:37 am
Please log in for more thread options will glbp work with a atm subinterface with an ip nat outside statement? for example, switch A:int atm0/1.10 p2p ip address 1.1.1.1 255.255.255.248 ip nat outside pvc 1/10 glbp 1 priority 200 glbp 1 preempt glbp 1 ip 1.1.1.2 ip flow ingress ip route-cache same-interface vbr-nrt 44000 15360 100 oam-pvc manage oam retry 30 3 1 oam ais-rdi 10 3 encapsulation aal5snap service-policy output IPFRCOS switch B:int atm0/1.20 p2p ip address 1.1.1.2 255.255.255.248 ip nat outside pvc 1/20 glbp 1 priority 150 glbp 1 preempt glbp 1 ip 1.1.1.2 | ||||||||||
| Similar Threads | Posted |
| glbp and ip nat | October 19, 2006, 7:37 am |
| HSRP and GLBP | February 9, 2006, 2:56 am |
| GLBP for our WAN HA solution | August 14, 2007, 5:50 am |
| GLBP traffic filtering | May 18, 2006, 5:10 pm |
| OSPF with HSRP or GLBP | June 7, 2007, 4:10 am |
| GLBP EIGRP Scenario | April 23, 2008, 12:14 pm |
| How is "pri" calculated automatically by GLBP ? | July 1, 2008, 1:23 am |
| spanning-tree gateway load balancing (STP & GLBP) | March 12, 2007, 9:46 pm |