cisco pix 506 power supply pin out

Hi,

I have a cisco PIX 506. I have lost power supply to the unit. Can anybody please give the pinout of the power supply. Also if you know the voltages and functions of the power supply it will be greatly appreciated.

Thanks in advance.

Reply to
junknowhere
Loading thread data ...

Hi,

Power requirements for the Cisco PIX 506 Firewall.

Autoswitching: 100-240 VAC

Frequency: 50-60 Hz

Current: 1.5-0.75 Amps

-----------------------------------------------------------

Reggie Grant has Cisco PIX 506 spare AC power supplies available.

formatting link
Part Number:

PIX-506-PWR-AC=

Hope this helps.

Brad Reese BradReese.Com Cisco Repair Worldwide

1293 Hendersonville Road, Suite 17 Asheville, North Carolina USA 28803 Toll Free: 877-549-2680 International: 828-277-7272 Website:
formatting link
Reply to
BradReeseCom

Thanks for the quick reply. But what I required was what voltage goes into which pins, that is +5v, -5v, +12v, Gnd., etc. This is because I would like to try to run it on Computer Power supply. If some body has a power supply, the pinout diagram is printed on the power supply unit.

Thanks

Reply to
junknowhere

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.